src/opcodes ChangeLog Makefile.am Makefile.in ...

[aoliva at sources dot redhat dot com]

CVSROOT:	/cvs/src
Module name:	src
Changes by:	aoliva@sources.redhat.com	2002-02-07 21:51:04

Modified files:
	opcodes        : ChangeLog Makefile.am Makefile.in configure 
	                 configure.in disassemble.c sh-dis.c 
	opcodes/po     : POTFILES.in opcodes.pot 
Added files:
	opcodes        : sh64-dis.c sh64-opc.c sh64-opc.h 

Log message:
	Contribute sh64-elf.
	2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
	* sh64-opc.c: Regenerate.
	2001-03-13  DJ Delorie  <dj@redhat.com>
	* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
	purpose is more obvious.
	* sh64-opc.c (shmedia_table): Ditto.
	* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
	(print_insn_shmedia): Ditto.
	2001-03-12  DJ Delorie  <dj@redhat.com>
	* sh64-opc.c: Adjust comments to reflect reality: replace bits
	3:0 with zeros (not "reserved"), replace "rrrrrr" with
	"gggggg" for two-operand floating point opcodes.  Remove
	"fsina".
	2001-01-08  Hans-Peter Nilsson  <hpn@cygnus.com>
	* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
	Correct printing of .byte:s.  Return number of printed bytes or
	-1; never 0.
	(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto.  Print as .byte:s
	to next four-byte-alignment if insn or data is not aligned.
	2001-01-06  Hans-Peter Nilsson  <hpn@cygnus.com>
	* sh64-dis.c: Update comments and fix comment formatting.
	(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
	Abort instead of setting length to 0.
	(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
	crange_bsearch_cmpl, sh64_get_contents_type,
	sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
	2001-01-05  Hans-Peter Nilsson  <hpn@cygnus.com>
	* sh64-opc.c: Remove #if 0:d entries for instructions not found in
	SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
	2000-12-30  Hans-Peter Nilsson  <hpn@cygnus.com>
	* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
	address with same prefix as SHcompact.
	In the disassembler, use a .cranges section for linked executables.
	* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
	and update for using structure in info->private_data.
	(struct sh64_disassemble_info): New.
	(is_shmedia_p): Delete.
	(crange_qsort_cmpb): New function.
	(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
	(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
	(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
	(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
	(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
	pair.  Display addresses for linked executables only.
	(print_insn_sh64x_media): Initialize info->private_data by calling
	init_sh64_disasm_info.
	(print_insn_sh64x): Ditto.  Find out type of contents by calling
	sh64_contents_type_disasm.  Display data regions using ".long" and
	".byte" similar to unrecognized opcodes.
	2000-12-19  Hans-Peter Nilsson  <hpn@cygnus.com>
	* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
	information in section flags before considering symbols.  Don't
	assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
	* configure.in (bfd_sh_arch): Check presence of sh64 insns by
	matching $target $canon_targets instead of looking at the
	now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
	* configure: Regenerate.
	2000-11-25  Hans-Peter Nilsson  <hpn@cygnus.com>
	* sh64-opc.c (shmedia_creg_table): New.
	* sh64-opc.h (shmedia_creg_info): New type.
	(shmedia_creg_table): Declare.
	* sh64-dis.c (creg_name): New function.
	(print_insn_shmedia): Use it.
	* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
	bfd_mach_sh5 to print_insn_sh64 if big-endian and to
	print_insn_sh64l if little-endian.
	* sh64-dis.c (print_insn_shmedia): Make r unsigned.
	(print_insn_sh64l): New.
	(print_insn_sh64x): New.
	(print_insn_sh64x_media): New.
	(print_insn_sh64): Break out code to print_insn_sh64x and
	print_insn_sh64x_media.
	2000-11-24  Hans-Peter Nilsson  <hpn@cygnus.com>
	* sh64-opc.h: New file
	* sh64-opc.c: New file
	* sh64-dis.c: New file
	* Makefile.am: Add sh64 targets.
	(HFILES): Add sh64-opc.h.
	(CFILES): Add sh64-opc.c and sh64-dis.c.
	(ALL_MACHINES): Add sh64 files.
	* Makefile.in: Regenerate.
	* configure.in: Add support for sh64 to bfd_sh_arch.
	* configure: Regenerate.
	* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
	(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
	print_insn_sh64.
	* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
	* po/POTFILES.in: Regenerate.
	* po/opcodes.pot: Regenerate.

Patches:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/sh64-dis.c.diff?cvsroot=src&r1=NONE&r2=1.1
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/sh64-opc.c.diff?cvsroot=src&r1=NONE&r2=1.1
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/sh64-opc.h.diff?cvsroot=src&r1=NONE&r2=1.1
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/ChangeLog.diff?cvsroot=src&r1=1.398&r2=1.399
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/Makefile.am.diff?cvsroot=src&r1=1.41&r2=1.42
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/Makefile.in.diff?cvsroot=src&r1=1.47&r2=1.48
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/configure.diff?cvsroot=src&r1=1.39&r2=1.40
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/configure.in.diff?cvsroot=src&r1=1.29&r2=1.30
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/disassemble.c.diff?cvsroot=src&r1=1.31&r2=1.32
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/sh-dis.c.diff?cvsroot=src&r1=1.9&r2=1.10
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/po/POTFILES.in.diff?cvsroot=src&r1=1.18&r2=1.19
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/opcodes/po/opcodes.pot.diff?cvsroot=src&r1=1.26&r2=1.27