This is the mail archive of the binutils@sources.redhat.com mailing list for the binutils project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Toplevel patch: Autogenerate Makefile targets 3 (*-build-*)

More of the same.  Tested with a Canadian cross configuration, built
build-side libiberty OK.  Again, this will sit on 3.4bib until 3.3 
branches.

	* Makefile.tpl: Autogenerate (*-build-*).
	* Makefile.def: Add build_modules.
	* Makefile.in: Regenerate.

--- Makefile.tpl.2	2002-11-13 14:19:32.000000000 -0500
+++ Makefile.tpl	2002-11-13 15:12:01.000000000 -0500
@@ -877,31 +877,28 @@
 	  mv gcc/tmp-include gcc/include 2>/dev/null; \
 	else true; fi
 
-# This rule is used to build the modules which are built with the
+# These rules are used to build the modules which are built with the
 # build machine's native compiler.
-.PHONY: $(ALL_BUILD_MODULES)
-$(ALL_BUILD_MODULES):
-	dir=`echo $@ | sed -e 's/all-build-//'`; \
-	if [ -f ./$${dir}/Makefile ] ; then \
+[+ FOR build_modules +]
+.PHONY: all-build-[+module+]
+all-build-[+module+]:
+	if [ -f ./[+module+]/Makefile ] ; then \
 	  r=`${PWD}`; export r; \
 	  s=`cd $(srcdir); ${PWD}`; export s; \
-	  (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+	  (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all); \
 	else \
 	  true; \
 	fi
 
-# This rule is used to configure the modules which are built with the
-# native tools.
-.PHONY: $(CONFIGURE_BUILD_MODULES)
-$(CONFIGURE_BUILD_MODULES):
-	@dir=`echo $@ | sed -e 's/configure-build-//'`; \
+.PHONY: configure-build-[+module+]
+configure-build-[+module+]:
 	if [ ! -d $(BUILD_SUBDIR) ]; then \
 	  true; \
-	elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+	elif [ -f $(BUILD_SUBDIR)/[+module+]/Makefile ] ; then \
 	  true; \
-	elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
-	  if [ -d $(srcdir)/$${dir} ]; then \
-	    [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+	elif echo " $(BUILD_CONFIGDIRS) " | grep " [+module+] " >/dev/null 2>&1; then \
+	  if [ -d $(srcdir)/[+module+] ]; then \
+	    [ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\
 	    r=`${PWD}`; export r; \
 	    s=`cd $(srcdir); ${PWD}`; export s; \
 	    AR="$(AR_FOR_BUILD)"; export AR; \
@@ -917,8 +914,8 @@
 	    NM="$(NM_FOR_BUILD)"; export NM; \
 	    RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
 	    WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
-	    echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
-	    cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+	    echo Configuring in $(BUILD_SUBDIR)/[+module+]; \
+	    cd "$(BUILD_SUBDIR)/[+module+]" || exit 1; \
 	    case $(srcdir) in \
 	    /* | [A-Za-z]:[\\/]*) \
 	      topdir=$(srcdir) ;; \
@@ -930,7 +927,7 @@
 	    esac; \
 	    if [ "$(srcdir)" = "." ] ; then \
 	      if [ "$(BUILD_SUBDIR)" != "." ] ; then \
-		if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+		if $(SHELL) $$s/symlink-tree $${topdir}/[+module+] "no-such-file" ; then \
 		  if [ -f Makefile ]; then \
 		    if $(MAKE) distclean; then \
 		      true; \
@@ -949,8 +946,8 @@
 	      srcdiroption="--srcdir=."; \
 	      libsrcdir="."; \
 	    else \
-	      srcdiroption="--srcdir=$${topdir}/$${dir}"; \
-	      libsrcdir="$$s/$${dir}"; \
+	      srcdiroption="--srcdir=$${topdir}/[+module+]"; \
+	      libsrcdir="$$s/[+module+]"; \
 	    fi; \
 	    if [ -f $${libsrcdir}/configure ] ; then \
 	      rm -f no-such-file skip-this-dir; \
@@ -966,7 +963,7 @@
 	    if [ -f skip-this-dir ] ; then \
 	      sh skip-this-dir; \
 	      rm -f skip-this-dir; \
-	      cd ..; rmdir $${dir} || true; \
+	      cd ..; rmdir [+module+] || true; \
 	    else \
 	      true; \
 	    fi; \
@@ -976,6 +973,7 @@
 	else \
 	  true; \
 	fi
+[+ ENDFOR build_modules +]
 
 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 # build a target all-X means to cd to X and make all.
--- Makefile.def.2	2002-11-13 14:19:36.000000000 -0500
+++ Makefile.def	2002-11-13 15:09:10.000000000 -0500
@@ -1,6 +1,8 @@
 #! /usr/bin/autogen
 AutoGen definitions Makefile.tpl;
 
+build_modules= { module= libiberty; };
+
 host_modules= { module= ash; };
 host_modules= { module= autoconf; };
 host_modules= { module= automake; };
--- Makefile.in.2	2002-11-13 14:19:41.000000000 -0500
+++ Makefile.in	2002-11-13 15:12:07.000000000 -0500
@@ -1563,31 +1563,28 @@
 	  mv gcc/tmp-include gcc/include 2>/dev/null; \
 	else true; fi
 
-# This rule is used to build the modules which are built with the
+# These rules are used to build the modules which are built with the
 # build machine's native compiler.
-.PHONY: $(ALL_BUILD_MODULES)
-$(ALL_BUILD_MODULES):
-	dir=`echo $@ | sed -e 's/all-build-//'`; \
-	if [ -f ./$${dir}/Makefile ] ; then \
+
+.PHONY: all-build-libiberty
+all-build-libiberty:
+	if [ -f ./libiberty/Makefile ] ; then \
 	  r=`${PWD}`; export r; \
 	  s=`cd $(srcdir); ${PWD}`; export s; \
-	  (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+	  (cd $(BUILD_SUBDIR)/libiberty && $(MAKE) all); \
 	else \
 	  true; \
 	fi
 
-# This rule is used to configure the modules which are built with the
-# native tools.
-.PHONY: $(CONFIGURE_BUILD_MODULES)
-$(CONFIGURE_BUILD_MODULES):
-	@dir=`echo $@ | sed -e 's/configure-build-//'`; \
+.PHONY: configure-build-libiberty
+configure-build-libiberty:
 	if [ ! -d $(BUILD_SUBDIR) ]; then \
 	  true; \
-	elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+	elif [ -f $(BUILD_SUBDIR)/libiberty/Makefile ] ; then \
 	  true; \
-	elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
-	  if [ -d $(srcdir)/$${dir} ]; then \
-	    [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+	elif echo " $(BUILD_CONFIGDIRS) " | grep " libiberty " >/dev/null 2>&1; then \
+	  if [ -d $(srcdir)/libiberty ]; then \
+	    [ -d $(BUILD_SUBDIR)/libiberty ] || mkdir $(BUILD_SUBDIR)/libiberty;\
 	    r=`${PWD}`; export r; \
 	    s=`cd $(srcdir); ${PWD}`; export s; \
 	    AR="$(AR_FOR_BUILD)"; export AR; \
@@ -1603,8 +1600,8 @@
 	    NM="$(NM_FOR_BUILD)"; export NM; \
 	    RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
 	    WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
-	    echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
-	    cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+	    echo Configuring in $(BUILD_SUBDIR)/libiberty; \
+	    cd "$(BUILD_SUBDIR)/libiberty" || exit 1; \
 	    case $(srcdir) in \
 	    /* | [A-Za-z]:[\\/]*) \
 	      topdir=$(srcdir) ;; \
@@ -1616,7 +1613,7 @@
 	    esac; \
 	    if [ "$(srcdir)" = "." ] ; then \
 	      if [ "$(BUILD_SUBDIR)" != "." ] ; then \
-		if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+		if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \
 		  if [ -f Makefile ]; then \
 		    if $(MAKE) distclean; then \
 		      true; \
@@ -1635,8 +1632,8 @@
 	      srcdiroption="--srcdir=."; \
 	      libsrcdir="."; \
 	    else \
-	      srcdiroption="--srcdir=$${topdir}/$${dir}"; \
-	      libsrcdir="$$s/$${dir}"; \
+	      srcdiroption="--srcdir=$${topdir}/libiberty"; \
+	      libsrcdir="$$s/libiberty"; \
 	    fi; \
 	    if [ -f $${libsrcdir}/configure ] ; then \
 	      rm -f no-such-file skip-this-dir; \
@@ -1652,7 +1649,7 @@
 	    if [ -f skip-this-dir ] ; then \
 	      sh skip-this-dir; \
 	      rm -f skip-this-dir; \
-	      cd ..; rmdir $${dir} || true; \
+	      cd ..; rmdir libiberty || true; \
 	    else \
 	      true; \
 	    fi; \
@@ -1663,6 +1660,7 @@
 	  true; \
 	fi
 
+
 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 # build a target all-X means to cd to X and make all.
 .PHONY: $(ALL_MODULES)
Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]