[patch] gas/doc/*.texi: Fix typos.

[Kazu Hirata <kazu at cs dot umass dot edu>]

Hi,

Attached is a patch to fix typos.  Committed as obvious.

Kazu Hirata

2003-10-26  Kazu Hirata  <kazu@cs.umass.edu>

	* doc/c-alpha.texi: Fix typos.
	* doc/c-ia64.texi: Likewise.
	* doc/c-mmix.texi: Likewise.
	* doc/c-sh64.texi: Likewise.
	* doc/c-xtensa.texi: Likewise.
	* doc/internals.texi: Likewise.

Index: c-alpha.texi
===================================================================
RCS file: /cvs/src/src/gas/doc/c-alpha.texi,v
retrieving revision 1.5
diff -u -r1.5 c-alpha.texi
--- c-alpha.texi	5 Jun 2003 03:27:03 -0000	1.5
+++ c-alpha.texi	26 Oct 2003 18:08:41 -0000
@@ -139,12 +139,12 @@
 @cindex Alpha registers
 @cindex register names, Alpha
 
-The 32 integer registers are refered to as @samp{$@var{n}} or
+The 32 integer registers are referred to as @samp{$@var{n}} or
 @samp{$r@var{n}}.  In addition, registers 15, 28, 29, and 30 may
-be refered to by the symbols @samp{$fp}, @samp{$at}, @samp{$gp},
+be referred to by the symbols @samp{$fp}, @samp{$at}, @samp{$gp},
 and @samp{$sp} respectively.
 
-The 32 floating-point registers are refered to as @samp{$f@var{n}}.
+The 32 floating-point registers are referred to as @samp{$f@var{n}}.
 
 @node Alpha-Relocs
 @subsection Relocations
@@ -153,7 +153,7 @@
 
 Some of these relocations are available for ECOFF, but mostly
 only for ELF.  They are modeled after the relocation format 
-introduced in Digial Unix 4.0, but there are additions.
+introduced in Digital Unix 4.0, but there are additions.
 
 The format is @samp{!@var{tag}} or @samp{!@var{tag}!@var{number}}
 where @var{tag} is the name of the relocation.  In some cases
Index: c-ia64.texi
===================================================================
RCS file: /cvs/src/src/gas/doc/c-ia64.texi,v
retrieving revision 1.2
diff -u -r1.2 c-ia64.texi
--- c-ia64.texi	19 Dec 2002 01:11:31 -0000	1.2
+++ c-ia64.texi	26 Oct 2003 18:08:41 -0000
@@ -110,12 +110,12 @@
 @cindex IA-64 registers
 @cindex register names, IA-64
 
-The 128 integer registers are refered to as @samp{r@var{n}}.
-The 128 floating-point registers are refered to as @samp{f@var{n}}.
-The 128 application registers are refered to as @samp{ar@var{n}}.
-The 128 control registers are refered to as @samp{cr@var{n}}.
-The 64 one-bit predicate registers are refered to as @samp{p@var{n}}.
-The 8 branch registers are refered to as @samp{b@var{n}}.
+The 128 integer registers are referred to as @samp{r@var{n}}.
+The 128 floating-point registers are referred to as @samp{f@var{n}}.
+The 128 application registers are referred to as @samp{ar@var{n}}.
+The 128 control registers are referred to as @samp{cr@var{n}}.
+The 64 one-bit predicate registers are referred to as @samp{p@var{n}}.
+The 8 branch registers are referred to as @samp{b@var{n}}.
 In addition, the assembler defines a number of aliases:
 @samp{gp} (@samp{r1}), @samp{sp} (@samp{r12}), @samp{rp} (@samp{b0}),
 @samp{ret0} (@samp{r8}), @samp{ret1} (@samp{r9}), @samp{ret2} (@samp{r10}),
Index: c-mmix.texi
===================================================================
RCS file: /cvs/src/src/gas/doc/c-mmix.texi,v
retrieving revision 1.5
diff -u -r1.5 c-mmix.texi
--- c-mmix.texi	18 Oct 2003 15:53:40 -0000	1.5
+++ c-mmix.texi	26 Oct 2003 18:08:42 -0000
@@ -443,7 +443,7 @@
 The directives @samp{WYDE}, @samp{TETRA} and @samp{OCTA} emit constants of
 two, four and eight bytes size respectively.  Before anything else happens
 for the directive, the current location is aligned to the respective
-constant-size bondary.  If a label is defined at the beginning of the
+constant-size boundary.  If a label is defined at the beginning of the
 line, its value will be that after the alignment.  A single operand can be
 omitted, defaulting to a zero value emitted for the directive.  Operands
 can be expressed as strings (@pxref{Strings}), in which case each
Index: c-sh64.texi
===================================================================
RCS file: /cvs/src/src/gas/doc/c-sh64.texi,v
retrieving revision 1.4
diff -u -r1.4 c-sh64.texi
--- c-sh64.texi	23 Apr 2003 21:09:04 -0000	1.4
+++ c-sh64.texi	26 Oct 2003 18:08:42 -0000
@@ -173,7 +173,7 @@
 ABIs specified must match.
 
 @item .uaquad
-Like .uaword and .ualong, this allows you to specify an intenionally
+Like .uaword and .ualong, this allows you to specify an intensionally
 unaligned quadword (64 bit word).
 
 @end table
Index: c-xtensa.texi
===================================================================
RCS file: /cvs/src/src/gas/doc/c-xtensa.texi,v
retrieving revision 1.1
diff -u -r1.1 c-xtensa.texi
--- c-xtensa.texi	1 Apr 2003 15:50:30 -0000	1.1
+++ c-xtensa.texi	26 Oct 2003 18:08:42 -0000
@@ -213,7 +213,7 @@
 Line Options}), or by using the @code{no-density} directive
 (@pxref{Density Directive, ,density}).
 
-It is a good idea @emph{not} to use the density instuctions directly.
+It is a good idea @emph{not} to use the density instructions directly.
 The assembler will automatically select dense instructions where
 possible.  If you later need to avoid using the code density option, you
 can disable it in the assembler without having to modify the code.
@@ -351,7 +351,7 @@
 @cindex relaxation of @code{MOVI} instructions
 The @code{MOVI} machine instruction can only materialize values in the
 range from -2048 to 2047.  Values outside this range are best
-materalized with @code{L32R} instructions.  Thus:
+materialized with @code{L32R} instructions.  Thus:
 
 @smallexample
     movi a0, 100000
Index: internals.texi
===================================================================
RCS file: /cvs/src/src/gas/doc/internals.texi,v
retrieving revision 1.36
diff -u -r1.36 internals.texi
--- internals.texi	1 Apr 2003 15:50:30 -0000	1.36
+++ internals.texi	26 Oct 2003 18:08:43 -0000
@@ -1740,7 +1740,7 @@
 @var{sec} argument), the narrowest likely relaxation mode is stored in
 @code{fr_subtype}, and that's that.
 
-If the symbol is undefined, or in a different section (and therefore moveable
+If the symbol is undefined, or in a different section (and therefore movable
 to an arbitrarily large distance), the largest available relaxation mode is
 specified, @code{fix_new} is called to produce the relocation record,
 @code{fr_fix} is increased to include the relocated field (remember, this