This is the mail archive of the
binutils@sourceware.org
mailing list for the binutils project.
[PATCH] opcodes: blackfin: drop "GP" register
- From: Mike Frysinger <vapier at gentoo dot org>
- To: binutils at sourceware dot org
- Cc: toolchain-devel at blackfin dot uclinux dot org
- Date: Fri, 11 Feb 2011 17:38:21 -0500
- Subject: [PATCH] opcodes: blackfin: drop "GP" register
There never was a "GP" register, so punt it from the decode map. It's
a hold over from a very old processor definition and never made it into
actual silicon.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-04 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (machine_registers): Delete REG_GP.
(reg_names): Delete "GP".
(decode_allregs): Change REG_GP to REG_LASTREG.
---
opcodes/bfin-dis.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/opcodes/bfin-dis.c b/opcodes/bfin-dis.c
index 85b793c..f624bac 100644
--- a/opcodes/bfin-dis.c
+++ b/opcodes/bfin-dis.c
@@ -227,7 +227,7 @@ enum machine_registers
REG_AZ, REG_AN, REG_AC0, REG_AC1, REG_AV0, REG_AV1, REG_AV0S, REG_AV1S,
REG_AQ, REG_V, REG_VS,
REG_sftreset, REG_omode, REG_excause, REG_emucause, REG_idle_req, REG_hwerrcause, REG_CC, REG_LC0,
- REG_LC1, REG_GP, REG_ASTAT, REG_RETS, REG_LT0, REG_LB0, REG_LT1, REG_LB1,
+ REG_LC1, REG_ASTAT, REG_RETS, REG_LT0, REG_LB0, REG_LT1, REG_LB1,
REG_CYCLES, REG_CYCLES2, REG_USP, REG_SEQSTAT, REG_SYSCFG, REG_RETI, REG_RETX, REG_RETN,
REG_RETE, REG_EMUDAT, REG_BR0, REG_BR1, REG_BR2, REG_BR3, REG_BR4, REG_BR5, REG_BR6,
REG_BR7, REG_PL0, REG_PL1, REG_PL2, REG_PL3, REG_PL4, REG_PL5, REG_SLP, REG_FLP,
@@ -262,7 +262,7 @@ static const char * const reg_names[] =
"AZ", "AN", "AC0", "AC1", "AV0", "AV1", "AV0S", "AV1S",
"AQ", "V", "VS",
"sftreset", "omode", "excause", "emucause", "idle_req", "hwerrcause", "CC", "LC0",
- "LC1", "GP", "ASTAT", "RETS", "LT0", "LB0", "LT1", "LB1",
+ "LC1", "ASTAT", "RETS", "LT0", "LB0", "LT1", "LB1",
"CYCLES", "CYCLES2", "USP", "SEQSTAT", "SYSCFG", "RETI", "RETX", "RETN",
"RETE", "EMUDAT",
"R0.B", "R1.B", "R2.B", "R3.B", "R4.B", "R5.B", "R6.B", "R7.B",
@@ -423,7 +423,7 @@ static const enum machine_registers decode_allregs[] =
REG_P0, REG_P1, REG_P2, REG_P3, REG_P4, REG_P5, REG_SP, REG_FP,
REG_I0, REG_I1, REG_I2, REG_I3, REG_M0, REG_M1, REG_M2, REG_M3,
REG_B0, REG_B1, REG_B2, REG_B3, REG_L0, REG_L1, REG_L2, REG_L3,
- REG_A0x, REG_A0w, REG_A1x, REG_A1w, REG_GP, REG_LASTREG, REG_ASTAT, REG_RETS,
+ REG_A0x, REG_A0w, REG_A1x, REG_A1w, REG_LASTREG, REG_LASTREG, REG_ASTAT, REG_RETS,
REG_LASTREG, REG_LASTREG, REG_LASTREG, REG_LASTREG, REG_LASTREG, REG_LASTREG, REG_LASTREG, REG_LASTREG,
REG_LC0, REG_LT0, REG_LB0, REG_LC1, REG_LT1, REG_LB1, REG_CYCLES, REG_CYCLES2,
REG_USP, REG_SEQSTAT, REG_SYSCFG, REG_RETI, REG_RETX, REG_RETN, REG_RETE, REG_EMUDAT,
--
1.7.4