This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH 1/2] Add port for Phoenix-RTOS in common configure files.


Ok, done.  Newlib bits checked in.  You will have to post changes for top-level configure.ac (instead of configure
directly) and config.sub to the appropriate mailing lists.

-- Jeff J.

----- Original Message -----
> Hi Jeff,
> 
> Actually noone ever thought about it on our side. If this won't break
> building without specifiing any version (until we decide how will it
> work for us and how to manage it) then I'm ok with it.
> Thank you for your big help.
> 
> Regards,
> Jakub
> 
> 2016-05-09 20:20 GMT+02:00 Jeff Johnston <jjohnstn@redhat.com>:
> > Hi Jakub,
> >
> > One minor comment.  I think you might want to follow rtems and cygwin and
> > use * after phoenix everywhere to allow you to add a version specifier like
> > rtems does.
> >
> > (e.g. configure --target=sparc-rtems4.8)
> >
> > If you are ok with that, I'll just add it to configure.host for you and
> > check the
> > changes in.
> >
> > -- Jeff J.
> >
> > ----- Original Message -----
> >> I don't get it why was the attachement stripped from previous mail.
> >> Here is link to FTP with this patch:
> >>
> >> http://files.phoesys.com/newlib/0001-Add-port-for-Phoenix-RTOS-in-common-configure-files.patch
> >>
> >> Thanks,
> >> Jakub
> >>
> >> 2016-05-09 10:46 GMT+02:00 Jakub Sejdak <jakub.sejdak@phoesys.com>:
> >> > Hi Jeff,
> >> >
> >> > It seems, that git-send-email replaced tabs with spaces in mail body
> >> > and that caused errors, because after regeneration there was no other
> >> > changes.
> >> > I attached patch once again (created from fresh newlib, just in case)
> >> > and added notification to proper mailing lists.
> >> >
> >> > Thanks,
> >> > Jakub
> >> >
> >> > 2016-05-06 23:25 GMT+02:00 Jeff Johnston <jjohnstn@redhat.com>:
> >> >> Jakub,
> >> >>
> >> >> Please read the top-level MAINTAINERS file for files that need to
> >> >> be submitted to other mailing lists.  For example, configure,
> >> >> config.sub,
> >> >> configure.ac
> >> >>
> >> >> Please also update your current newlib and generate a patch that
> >> >> you can attach (I get all kinds of rejections trying to copy the
> >> >> data out of the mail).  I have already committed your 2nd patch
> >> >> which applied fine.
> >> >>
> >> >> Thanks,
> >> >>
> >> >> -- Jeff J.
> >> >>
> >> >> ----- Original Message -----
> >> >>> From: Kuba Sejdak <jakub.sejdak@phoesys.com>
> >> >>>
> >> >>> ---
> >> >>>  COPYING.NEWLIB               | 26 ++++++++++++++++++++++++++
> >> >>>  config.sub                   |  3 +++
> >> >>>  configure                    |  6 ++++++
> >> >>>  newlib/configure.host        | 10 ++++++++++
> >> >>>  newlib/libc/sys/configure    |  3 +++
> >> >>>  newlib/libc/sys/configure.in |  1 +
> >> >>>  6 files changed, 49 insertions(+)
> >> >>>
> >> >>> diff --git a/COPYING.NEWLIB b/COPYING.NEWLIB
> >> >>> index 24e7c73..e7e1f8a 100644
> >> >>> --- a/COPYING.NEWLIB
> >> >>> +++ b/COPYING.NEWLIB
> >> >>> @@ -1023,3 +1023,29 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
> >> >>> NEGLIGENCE OR OTHERWISE)
> >> >>>  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> >> >>>  OF
> >> >>>  THE
> >> >>>  POSSIBILITY OF SUCH DAMAGE.
> >> >>>
> >> >>> +(45) Phoenix Systems - Phoenix-RTOS targets
> >> >>> +
> >> >>> +Copyright (c) 2016 Phoenix Systems
> >> >>> +All rights reserved.
> >> >>> +
> >> >>> +Redistribution and use in source and binary forms, with or without
> >> >>> +modification, are permitted provided that the following conditions
> >> >>> +are met:
> >> >>> +1. Redistributions of source code must retain the above copyright
> >> >>> +   notice, this list of conditions and the following disclaimer.
> >> >>> +2. Redistributions in binary form must reproduce the above copyright
> >> >>> +   notice, this list of conditions and the following disclaimer in
> >> >>> the
> >> >>> +   documentation and/or other materials provided with the
> >> >>> distribution.
> >> >>> +
> >> >>> +THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
> >> >>> AND
> >> >>> +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> >> >>> +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
> >> >>> PURPOSE
> >> >>> +ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
> >> >>> LIABLE
> >> >>> +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> >> >>> CONSEQUENTIAL
> >> >>> +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> >> >>> GOODS
> >> >>> +OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> >> >>> +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
> >> >>> STRICT
> >> >>> +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
> >> >>> WAY
> >> >>> +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
> >> >>> OF
> >> >>> +SUCH DAMAGE.
> >> >>> +
> >> >>> diff --git a/config.sub b/config.sub
> >> >>> index da6d1b6..f7adbde 100755
> >> >>> --- a/config.sub
> >> >>> +++ b/config.sub
> >> >>> @@ -1531,6 +1531,9 @@ case $os in
> >> >>>               ;;
> >> >>>       -nacl*)
> >> >>>               ;;
> >> >>> +     -phoenix)
> >> >>> +             os=-phoenix
> >> >>> +             ;;
> >> >>>       -none)
> >> >>>               ;;
> >> >>>       *)
> >> >>> diff --git a/configure b/configure
> >> >>> index 35f231e..90e3e68 100755
> >> >>> --- a/configure
> >> >>> +++ b/configure
> >> >>> @@ -3673,6 +3673,9 @@ case "${target}" in
> >> >>>    *-*-netware*)
> >> >>>      noconfigdirs="$noconfigdirs target-newlib target-libgloss"
> >> >>>      ;;
> >> >>> +  *-*-phoenix)
> >> >>> +    noconfigdirs="$noconfigdirs target-libgloss"
> >> >>> +    ;;
> >> >>>    *-*-tpf*)
> >> >>>      noconfigdirs="$noconfigdirs target-newlib target-libgloss"
> >> >>>      ;;
> >> >>> @@ -3764,6 +3767,9 @@ case "${target}" in
> >> >>>    arm-*-pe*)
> >> >>>      noconfigdirs="$noconfigdirs target-libgloss"
> >> >>>      ;;
> >> >>> +  arm-*-phoenix*)
> >> >>> +    noconfigdirs="$noconfigdirs target-libgloss"
> >> >>> +    ;;
> >> >>>    arm-*-riscix*)
> >> >>>      noconfigdirs="$noconfigdirs ld target-libgloss"
> >> >>>      ;;
> >> >>> diff --git a/newlib/configure.host b/newlib/configure.host
> >> >>> index bb163ec..9bc40de 100644
> >> >>> --- a/newlib/configure.host
> >> >>> +++ b/newlib/configure.host
> >> >>> @@ -385,6 +385,11 @@ case "${host}" in
> >> >>>       signal_dir=
> >> >>>       sys_dir=netware
> >> >>>       ;;
> >> >>> +  *-*-phoenix)
> >> >>> +     sys_dir=phoenix
> >> >>> +     posix_dir=posix
> >> >>> +     unix_dir=unix
> >> >>> +     ;;
> >> >>>    *-*-rtems*)                        # generic RTEMS support
> >> >>>       sys_dir=rtems
> >> >>>       posix_dir=posix
> >> >>> @@ -578,6 +583,11 @@ case "${host}" in
> >> >>>       newlib_cflags="${newlib_cflags} -DHAVE_OPENDIR -DHAVE_RENAME
> >> >>>       -DSIGNAL_PROVIDED -D_COMPILING_NEWLIB -DHAVE_BLKSIZE
> >> >>>       -DHAVE_FCNTL
> >> >>>       -DMALLOC_PROVIDED"
> >> >>>       syscall_dir=syscalls
> >> >>>       ;;
> >> >>> +  *-*-phoenix)
> >> >>> +     newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES
> >> >>> -D_COMPILING_NEWLIB
> >> >>> -DHAVE_BLKSIZE -DHAVE_NANOSLEEP"
> >> >>> +     default_newlib_io_long_long="yes"
> >> >>> +     syscall_dir=
> >> >>> +     ;;
> >> >>>  # RTEMS supplies its own versions of some routines:
> >> >>>  #       malloc()            (reentrant version)
> >> >>>  #       exit()              RTEMS has a "global" reent to flush
> >> >>> diff --git a/newlib/libc/sys/configure b/newlib/libc/sys/configure
> >> >>> index d64b0dd..55c6e13 100755
> >> >>> --- a/newlib/libc/sys/configure
> >> >>> +++ b/newlib/libc/sys/configure
> >> >>> @@ -797,6 +797,7 @@ m88kbug
> >> >>>  mmixware
> >> >>>  netware
> >> >>>  or1k
> >> >>> +phoenix
> >> >>>  rdos
> >> >>>  rtems
> >> >>>  sh
> >> >>> @@ -11828,6 +11829,8 @@ subdirs="$subdirs a29khif"
> >> >>>   ;;
> >> >>>       or1k) subdirs="$subdirs or1k"
> >> >>>   ;;
> >> >>> +     phoenix) subdirs="$subdirs phoenix"
> >> >>> + ;;
> >> >>>       rdos) subdirs="$subdirs rdos"
> >> >>>   ;;
> >> >>>       rtems) subdirs="$subdirs rtems"
> >> >>> diff --git a/newlib/libc/sys/configure.in
> >> >>> b/newlib/libc/sys/configure.in
> >> >>> index b50a6d3..bc6cb88 100644
> >> >>> --- a/newlib/libc/sys/configure.in
> >> >>> +++ b/newlib/libc/sys/configure.in
> >> >>> @@ -34,6 +34,7 @@ if test -n "${sys_dir}"; then
> >> >>>       mmixware) AC_CONFIG_SUBDIRS(mmixware) ;;
> >> >>>       netware) AC_CONFIG_SUBDIRS(netware) ;;
> >> >>>       or1k) AC_CONFIG_SUBDIRS(or1k) ;;
> >> >>> +     phoenix) AC_CONFIG_SUBDIRS(phoenix) ;;
> >> >>>       rdos) AC_CONFIG_SUBDIRS(rdos) ;;
> >> >>>       rtems) AC_CONFIG_SUBDIRS(rtems) ;;
> >> >>>       sh) AC_CONFIG_SUBDIRS(sh) ;;
> >> >>> --
> >> >>> 2.7.4
> >> >>>
> >> >>>
> >>
> 


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]