This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [Patch][Gold] BE8 for ARM


On 08/07/16 00:25, Bharathi Seshadri (bseshadr) wrote:
> Hi,
> 
> This patch implements the BE8 support for ARM in the gold linker. It has been tested on a non-trivial large program (size ~120MB). 
> Thanks to Cary Coutant for his initial review.
> 
> gold/ChangeLog
> 2016-07-07  Bharathi Seshadri  <bseshadr@cisco.com>
> 
>         * options.h (General_options): Add --be8 option.
>         * arm.cc (Arm_relobj::do_relocate_sections): Add code to swap for be8.
>           (Output_data_plt_arm_standard::do_fill_first_plt_entry): Likewise.
>           (Output_data_plt_arm_short::do_fill_plt_entry): Likewise.
>           (Output_data_plt_arm_long::do_fill_plt_entry): Likewise.
>           (Target_arm::do_adjust_elf_header): Do EF_ARM_BE8 adjustment.
> 
> Regards,
> Bharathi
> 

Why are you only swapping ARM code?  Thumb is just the same, but in
granules of 2 bytes rather than 4.

R.
> 
> be8_arm_patch.txt
> 
> 
> diff --git a/gold/arm.cc b/gold/arm.cc
> index c47b002..4b0f85f 100644
> --- a/gold/arm.cc
> +++ b/gold/arm.cc
> @@ -6639,6 +6639,60 @@ Arm_relobj<big_endian>::do_relocate_sections(
>  	      section_address,
>  	      section_size);
>  	}
> +
> +	// BE8 swapping 
> + 	if (parameters->options().user_set_be8()) 
> +	  {
> +	    section_size_type  span_start, span_end;
> +	    elfcpp::Shdr<32, big_endian> 
> +	      shdr(pshdrs + i * elfcpp::Elf_sizes<32>::shdr_size);
> +	    Mapping_symbol_position section_start(i, 0);
> +	    typename Mapping_symbols_info::const_iterator p =
> +	      this->mapping_symbols_info_.lower_bound(section_start);
> +	    unsigned char* view = (*pviews)[i].view;
> +	    Arm_address view_address = (*pviews)[i].address;
> +	    section_size_type view_size = (*pviews)[i].view_size;
> +	    while (p != this->mapping_symbols_info_.end() && p->first.first == i)
> +	      {
> +                typename Mapping_symbols_info::const_iterator next =
> +                this->mapping_symbols_info_.upper_bound(p->first);
> + 
> +                // Only swap arm code.
> +                if (p->second == 'a') 
> +		  {
> +		    Output_section* os = this->output_section(i);
> +		    gold_assert(os != NULL);
> +		    Arm_address section_address = 
> +		      this->simple_input_section_output_address(i, os);
> +		    span_start = convert_to_section_size_type(p->first.second);
> +		    if (next != this->mapping_symbols_info_.end() 
> +		        && next->first.first == i)
> +                      span_end = convert_to_section_size_type(next->first.second);
> +                    else
> +                      span_end = convert_to_section_size_type(shdr.get_sh_size());
> +		    unsigned char* section_view = 
> +		      view + (section_address - view_address);
> +	  	    uint64_t section_size = this->section_size(i);
> +
> +	  	    gold_assert(section_address >= view_address
> +		  	        && ((section_address + section_size)
> +			        <= (view_address + view_size)));
> +
> +		    // Set Output view for swapping
> +		    unsigned char *oview = section_view + span_start;
> +		    unsigned int index = 0;
> + 		    while (index + 3 < (span_end - span_start)) 
> +		      {
> +		        typedef typename elfcpp::Swap<32, big_endian>::Valtype Valtype;
> +		        Valtype* wv = reinterpret_cast<Valtype*>(oview+index);
> +		        uint32_t val = elfcpp::Swap<32, false>::readval(wv);
> +		        elfcpp::Swap<32, true>::writeval(wv, val);
> +		        index += 4;
> +		       }
> +	          } 
> +	        p = next;		
> +	      }
> +	  }
>      }
>  }
>  
> @@ -7785,9 +7839,16 @@ Output_data_plt_arm_standard<big_endian>::do_fill_first_plt_entry(
>    const size_t num_first_plt_words = (sizeof(first_plt_entry)
>  				      / sizeof(first_plt_entry[0]));
>    for (size_t i = 0; i < num_first_plt_words - 1; i++)
> -    elfcpp::Swap<32, big_endian>::writeval(pov + i * 4, first_plt_entry[i]);
> +    if (parameters->options().user_set_be8())
> +      elfcpp::Swap<32, false>::writeval(pov + i * 4, first_plt_entry[i]);
> +    else
> +      elfcpp::Swap<32, big_endian>::writeval(pov + i * 4, first_plt_entry[i]);
>    // Last word in first PLT entry is &GOT[0] - .
> -  elfcpp::Swap<32, big_endian>::writeval(pov + 16,
> +  if (parameters->options().user_set_be8())
> +    elfcpp::Swap<32, false>::writeval(pov + 16,
> +					 got_address - (plt_address + 16));
> +  else
> +    elfcpp::Swap<32, big_endian>::writeval(pov + 16,
>  					 got_address - (plt_address + 16));
>  }
>  
> @@ -7846,11 +7907,20 @@ Output_data_plt_arm_short<big_endian>::do_fill_plt_entry(
>      gold_error(_("PLT offset too large, try linking with --long-plt"));
>  
>    uint32_t plt_insn0 = plt_entry[0] | ((offset >> 20) & 0xff);
> -  elfcpp::Swap<32, big_endian>::writeval(pov, plt_insn0);
>    uint32_t plt_insn1 = plt_entry[1] | ((offset >> 12) & 0xff);
> -  elfcpp::Swap<32, big_endian>::writeval(pov + 4, plt_insn1);
>    uint32_t plt_insn2 = plt_entry[2] | (offset & 0xfff);
> -  elfcpp::Swap<32, big_endian>::writeval(pov + 8, plt_insn2);
> +  if (parameters->options().user_set_be8())
> +    { 
> +      elfcpp::Swap<32, false>::writeval(pov, plt_insn0);
> +      elfcpp::Swap<32, false>::writeval(pov + 4, plt_insn1);
> +      elfcpp::Swap<32, false>::writeval(pov + 8, plt_insn2);
> +    }
> +  else
> +    {
> +      elfcpp::Swap<32, big_endian>::writeval(pov, plt_insn0);
> +      elfcpp::Swap<32, big_endian>::writeval(pov + 4, plt_insn1);
> +      elfcpp::Swap<32, big_endian>::writeval(pov + 8, plt_insn2);
> +    }
>  }
>  
>  // This class generates long (16-byte) entries, for arbitrary displacements.
> @@ -7906,13 +7976,23 @@ Output_data_plt_arm_long<big_endian>::do_fill_plt_entry(
>  		    - (plt_address + plt_offset + 8));
>  
>    uint32_t plt_insn0 = plt_entry[0] | (offset >> 28);
> -  elfcpp::Swap<32, big_endian>::writeval(pov, plt_insn0);
>    uint32_t plt_insn1 = plt_entry[1] | ((offset >> 20) & 0xff);
> -  elfcpp::Swap<32, big_endian>::writeval(pov + 4, plt_insn1);
>    uint32_t plt_insn2 = plt_entry[2] | ((offset >> 12) & 0xff);
> -  elfcpp::Swap<32, big_endian>::writeval(pov + 8, plt_insn2);
>    uint32_t plt_insn3 = plt_entry[3] | (offset & 0xfff);
> -  elfcpp::Swap<32, big_endian>::writeval(pov + 12, plt_insn3);
> +  if (parameters->options().user_set_be8())
> +    {
> +      elfcpp::Swap<32, false>::writeval(pov, plt_insn0);
> +      elfcpp::Swap<32, false>::writeval(pov + 4, plt_insn1);
> +      elfcpp::Swap<32, false>::writeval(pov + 8, plt_insn2);
> +      elfcpp::Swap<32, false>::writeval(pov + 12, plt_insn3);
> +    }
> +  else
> +    {
> +      elfcpp::Swap<32, big_endian>::writeval(pov, plt_insn0);
> +      elfcpp::Swap<32, big_endian>::writeval(pov + 4, plt_insn1);
> +      elfcpp::Swap<32, big_endian>::writeval(pov + 8, plt_insn2);
> +      elfcpp::Swap<32, big_endian>::writeval(pov + 12, plt_insn3);
> +    }
>  }
>  
>  // Write out the PLT.  This uses the hand-coded instructions above,
> @@ -10683,7 +10763,14 @@ Target_arm<big_endian>::do_adjust_elf_header(
>      e_ident[elfcpp::EI_OSABI] = 0;
>    e_ident[elfcpp::EI_ABIVERSION] = 0;
>  
> -  // FIXME: Do EF_ARM_BE8 adjustment.
> +  // Do EF_ARM_BE8 adjustment.
> +  if (parameters->options().user_set_be8() && !big_endian)
> +    gold_error("BE8 images only valid in big-endian mode.");
> +  if (parameters->options().user_set_be8())
> +    {
> +      flags |= elfcpp::EF_ARM_BE8;
> +      this->set_processor_specific_flags(flags);
> +    }
>  
>    // If we're working in EABI_VER5, set the hard/soft float ABI flags
>    // as appropriate.
> diff --git a/gold/options.h b/gold/options.h
> index 23c9658..7260c41 100644
> --- a/gold/options.h
> +++ b/gold/options.h
> @@ -674,6 +674,9 @@ class General_options
>    DEFINE_bool_alias(dn, Bdynamic, options::ONE_DASH, '\0',
>  		    N_("alias for -Bstatic"), NULL, true);
>  
> +  DEFINE_bool(be8,options::TWO_DASHES, '\0', false,
> +              N_("(ARM only) be8 -byte invariant addressing."), NULL);
> +
>    DEFINE_bool(Bgroup, options::ONE_DASH, '\0', false,
>  	      N_("Use group name lookup rules for shared library"), NULL);
>  
> 


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]