Re: remote gdb with shared serial port

["D.F.S." <dfs@xmission.com>]

> The box is plugged into the serial port of an NCD X-terminal, so the
> host computer must communicate with the serial port via a socket, such 
> as a telnet connection.  


Somewhat off subject as to Cross compilers, but related to embedded systems.

How is this setup handled?

I Need to build an RS-485-Ethernet Gateway

I also have some older Ethernet Routers and a new ISDN router which only 
configure thru a serial port. 
Being able to telnet to them from anywhere on the network would be great.

I already have a bunch of older NCD X-terms.
Yank the base off the CRT and stuff it in a closet someplace.

The rs-232 to 485 is not an issue.

This may be a perfect way to save work and use hardware I already have.


Marc

_______________________________________________
New CrossGCC FAQ: http://www.objsw.com/CrossGCC
_______________________________________________
To remove yourself from the crossgcc list, send
mail to crossgcc-request@cygnus.com with the
text 'unsubscribe' (without the quotes) in the
body of the message.