This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Jens-Christian Lache wrote: > Hi Joel! > > > > > > > tanks joel brenner > > > > There is olso a problem if I call MainApp() (C main function), at the end of startup code (call from ARM-code to ARM-code), how described in /gcc/config/arm/README-interworking; if I use the ASM instructions: > > > > ldr r0, =MainApp > > mov lr, pc > > bx r0 > > > > If I do a step at instruction "bx ro" gdb don't halts the execution at the next instruction. > > Did you try "stepi"? You should work with "SRC+ASM" (This works best with the > latest snapshots from gdb) And then step through all instructions. Of course you > can set the lr and pc by hand in the "register" window. > > Jens-Christian > > > > > tanks brenner joel > > > > > > > > -- > > Jens-Christian Lache > Technische Universitaet Hamburg-Harburg > www.tu-harburg.de/~sejl1601 > Mail: > lache@tu-harburg.de > lache@ngi.de > Tel.: > +0491759610756 ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |