This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.

See the CrossGCC FAQ for lots more information.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

FW: Problem regarding sh-hms tool.




-----Original Message-----
From:	Nivrutti [SMTP:nivruttia@kpit.com]
Sent:	Monday, April 09, 2001 12:44 PM
To:	'karuottu@freenet.hut.fi'
Subject:	RE: Problem regarding sh-hms tool.

Hi kai,
Thanks a lot for reply.I hope I will not disturb you more.
I have a little problem here...
When I flashed the test program to the target, BUT it won't run.
I debugged it on Hitachis Debugger Interface.(HDI) debugging tool.
Then it works, BUT for that I have to set PC to 0x00400000 manualy and followed by RUN command.
Here I am attaching the startup and link files that I have included.
   
 
 
How the program will start automatically running(i.e It will start from 0x00400000)?
If you could locate the problem, I will be more thankful to you.
Waiting for reply.
Thank you !
Nivrutti.
-----Original Message-----
From:	Kai Ruottu [SMTP:kai.ruottu@luukku.com]
Sent:	Saturday, April 07, 2001 1:39 PM
Cc:	Nivrutti
Subject:	Re: Problem regarding sh-hms tool.

Kai Ruottu wrote:
> 
> Nivrutti wrote:
> >
> > I write a simple program for testing which works fine if it is complied with HITACHIs
> > Embedded Workshop(HEW by Hitachi)..
> > but it fails when it was downloaded to the target device on EVB.
> 
>  If you for some reason don't have the SH2-EVB manual, getting it should have high
> priority... The Hitachi sites should have it and asking Hitachi to send all their free
> CDROMs, the "Electronic Components Databook" etc., is recommended.

 You didn't mention the EVB type, but probably the EVB7055 stuff can be applied to
EVB7045 and vice versa. The URL :

  http://www.hmse.com/products/evk/documents.htm

at least has info and manuals for the Hitachi-EVBs... I couldn't find these from the
"Databook 2000" I last received from Hitachi. It seems that a new "2001" version CDROM
is now available for the askers... Of course the EU-office will perhaps not mail to
America or Asia, so it is up to the 'local area' Hitachi office what they want to send
to the current or potential customers....

 Anyhow the 'evb7055_tutor.pdf' (2 Mbytes) seems to have the "How-To" instructions
for starting with SH2 and using the GNU tools for it... Recommended...

Cheers, Kai

build.bat

Copy of START.S

flash.lnk

FLASH.C

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]