This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
David: Is there a binutils-2.11.2? I seem to recall someone mentioning yesterday that this was a known problem in the later release of binutils. Check the archives at http://sources.redhat.com/ml/crossgcc. b.g. On Thu, Jun 21, 2001 at 01:41:28PM -0600, MEDBERRY,DAVID (A-Loveland,ex1) wrote: > (Actually: > > $PREFIX/bin/powerpc-linux-as > $PREFIX/bin/powerpc-linux-ld > $PREFIX/bin/powerpc-linux-gasp > > were created.) > > -----Original Message----- > From: MEDBERRY,DAVID (A-Loveland,ex1) [mailto:david_medberry@agilent.com] > Sent: Thursday, June 21, 2001 10:25 AM > To: 'Vermeulen Jan'; 'CrossGCC' > Subject: RE: xscale with gcc 3.0 > > > Jan, > > I have just epxerienced the same binutils behavior when making an hpux cross > powerpc-linux binutils package: > as > ld > gasp > > were the only bin's built. binutils version 2.11.1 (straight from > ftp.gnu.org <ftp://ftp.gnu.org> ). > > No error was reported in the process. I am considering backing down to 2.10 > and trying again.... > > I haven't found any tips or tricks anywhere on the net to avoid this.... > > -dave > > > > -----Original Message----- > From: Vermeulen Jan [mailto:Jan.Vermeulen@siemens.atea.be] > Sent: Thursday, June 21, 2001 2:58 AM > To: 'CrossGCC' > Subject: xscale with gcc 3.0 > > > > Hi there, > > I am trying to build a crossgcc for xscale now with the gcc 3.0, as it is > said it is now supported. > My platform is linux (2.4.3) > Binutils builds without errors, but seems only to make the 'as', 'gasp' and > 'ld'. Nothing else. > > So when i try to build the (core) gcc-3.0 part of the toolchain, it fails : > make[2]: xscale-elf-ar: Command not found > make[2]: *** [libgcc.a] Error 127 > make[2]: Leaving directory `/home/jan/newbuild/gcc/gcc' > make[1]: *** [stmp-multilib] Error 2 > make[1]: Leaving directory `/home/jan/newbuild/gcc/gcc' > make: *** [all-gcc] Error 2 > > Same with "xscale-coff" configuration. > (i am following the cross-build script from Bill). > > Now what's the story with xscale ? Is it fully supported or only a simpel > assembler/linker? > I know I can make a cross-gcc by configuring for arm-elf (would arm-coff > work too?), but > i don't understand why xscale-elf can't work if arm-elf does... > > Thanks if you are able to clarify the confusion :) > Jan > -- Bill Gatliff bgat@billgatliff.com ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |