This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Thank You Peter and Philip! Its finally running. Resulting script tarball attached. John E. A. p.s. This is an example for a presentation at the Embedded Linux Expo in San Jose this week: Building GNU crosstools - from the newbies perspective. (I've certainly got the last part wired 8-) Check it out in the archives after 6/29/2001: www.elinuxexpo.com -----Original Message----- From: Peter Barada [mailto:pbarada@mail.wm.sps.mot.com] Sent: Friday, June 22, 2001 1:58 PM To: john@triscend.com Cc: crossgcc@sourceware.cygnus.com; uclinux-dev@uClinux.org Subject: Re: wirespeed arm-uclinux gcc/glibc build error >../glibc-2.1.3-uclinux-arm/configure --host=3Darm-uclinux = >--enable-add-ons --prefix=3D${PREFIX}/arm-uclinux = >--with-headers=3D${PREFIX}/arm-uclinux/include --without-fp = >--program-prefix=3D"arm-uclinux-" --disable-profile --enable-omit-fp = >--disable-shared --enable-static-nss --disable-libio 2>&1 | tee = Try adding: CC=arm-wirespeed-uclinux-gcc \ AR=arm-wirespeed-uclinux-ar \ RANLIB=arm-wirespeed-uclinux-ranlib to the start of the configure line for glibc. This will tell configure to use these tools instead of 'gcc', 'ar', and 'ranlib'. You have ot make sure that the cross tools are in your path so configure can find them... So it should look like: CC=arm-wirespeed-uclinux-gcc \ AR=arm-wirespeed-uclinux-ar \ RANLIB=arm-wirespeed-uclinux-ranlib ../glibc-2.1.3-uclinux-arm/configure --host=3Darm-uclinux \ --enable-add-ons --prefix=3D${PREFIX}/arm-uclinux \ --with-headers=3D${PREFIX}/arm-uclinux/include --without-fp \ --program-prefix=3D"arm-uclinux-" --disable-profile --enable-omit-fp \ --disable-shared --enable-static-nss --disable-libio 2>&1 | tee \ configure.log Give it whirl and see what happens... -- Peter Barada Peter.Barada@motorola.com Wizard 781-852-2768 (direct) WaveMark Solutions(wholly owned by Motorola) 781-270-0193 (fax)
------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |