Re: Newbie can't build linux cross-compiler for solaris

[Jim Tison <jtison at ntplx dot net>]

The other Jim nailed it ... I didn't know you needed a Canadian Cross. I've 
never built one.

Peace,
--Jim--


On Thursday 30 August 2001 19:38, David Thompson wrote:
> Hi Jim, but I need the header files from the target platform,
> right?  Isn't this how --with-headers is used?  In my case,
> building on Solaris, I need --with-headers to point to a
> path where I've copied the Linux headers ... right ??
>
> > -----Original Message-----
> > From: Jim Tison [mailto:jtison@ntplx.net]
> > Sent: Thursday, August 30, 2001 4:15 PM
> > To: 'crossgcc'
> > Subject: Re: Newbie can't build linux cross-compiler for solaris
> >
> >
> > I ran into the same thing at the same place for another
> > target. What fixed it
> > for me was using the --with-headers= switch in ./configure.
> > This needs to
> > point to the system headers. In your case (you'll be running
> > this compiler
> > with the Sun libs, I take it....) you can probably just get away with
> > pointing --with-headers to /usr/include (or is that
> > /usr/ccb/include? Heck,
> > I've forgotten... my Solaris experience is so dated!).
> >
> > You will need to reconfigure and restart your build. It might
> > be smart to
> > make clean, too.
> >
> > Peace,
> > --Jim--
> >
> > On Thursday 30 August 2001 17:50, David Thompson wrote:
> > > Hi there,
> > >
> > > I am a newbie at building a cross compiler so I'm trying
> > > to read everything I can find, but I've failed in all my
> > > attempts to build a Linux gcc cross-compiler than runs
> > > on Solaris.  Here is my simple script,
> > >
> > >  #!/bin/ksh
> > >  GCC=gcc-2.95.3
> > >  BINUTILS=binutils-2.10.1
> > >  TARGET=i686-pc-linux-gnu
> > >  SRCDIR=/home/davidt/gnu/src/sun
> > >  BINDIR=/home/davidt/gnu/bin/sun
> > >
> > >  cd $SRCDIR
> > >  mkdir build-binutils build-gcc
> > >
> > >  # configure, build and install binutils
> > >  cd build-binutils
> > >  ../$BINUTILS/configure --target=$TARGET --prefix=$BINDIR -v
> > >  make all install
> > >
> > >  # configure, build and install gcc
> > >  cd ../build-gcc
> > >  ../$GCC/configure --target=$TARGET --prefix=$BINDIR -v
> > >  make all install
> > >
> > > I have untarred the packages into /home/davidt/gnu/bin/sun,
> > > and binutils builds fine.  The error I get is from building
> > > gcc, here is the [slightly formatted] error output,
> > >
> > >  for name in _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3
> >
> > _negdi2 _lshrdi3 \
> >
> > >   _ashldi3 _ashrdi3 _ffsdi2 _udiv_w_sdiv _udivmoddi4
> >
> > _cmpdi2 _ucmpdi2 \
> >
> > >   _floatdidf _floatdisf _fixunsdfsi _fixunssfsi _fixunsdfdi
> >
> > _fixdfdi \
> >
> > >   _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
> > >   _fixtfdi _fixunstfdi _floatditf __gcc_bcmp _varargs
> >
> > __dummy _eprintf \
> >
> > >   _bb _shtab _clear_cache _trampoline __main _exit _ctors _pure; \
> > >  do \
> > >    echo ${name}; \
> > >     /home/davidt/gnu/src/sun/build-gcc/gcc/xgcc \
> > >      -B/home/davidt/gnu/src/sun/build-gcc/gcc/ \
> > >      -B/home/davidt/gnu/bin/sun/i686-pc-linux-gnu/bin/ \
> > >      -I/home/davidt/gnu/bin/sun/i686-pc-linux-gnu/include -O2  \
> > >      -DCROSS_COMPILE -DIN_GCC   -DSVR4  -g -O2 -I./include  \
> > >      -fPIC -g1  -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED \
> > >      -I. -I../../gcc-2.95.3/gcc -I../../gcc-2.95.3/gcc/config \
> > >      -I../../gcc-2.95.3/gcc/../include -c -DL${name} \
> > >      ../../gcc-2.95.3/gcc/libgcc2.c -o ${name}.o; \
> > >    if [ $? -eq 0 ] ; then true; else exit 1; fi; \
> > >    i686-pc-linux-gnu-ar rc tmplibgcc2.a ${name}.o; \
> > >    rm -f ${name}.o; \
> > >  done
> > >  _muldi3
> > >  ../../gcc-2.95.3/gcc/libgcc2.c:41: stdlib.h: No such file
> >
> > or directory
> >
> > >  ../../gcc-2.95.3/gcc/libgcc2.c:42: unistd.h: No such file
> >
> > or directory
> >
> > >  make[1]: *** [libgcc2.a] Error 1
> > >  make[1]: Leaving directory `/home/davidt/gnu/src/sun/build-gcc/gcc'
> > >  make: *** [all-gcc] Error 2
> > >
> > > I don't understand why stdlib.h & unistd.h cannot be found.  I need
> > > help, what am I doing wrong?  Any advice or URLs that would help me
> > > (the above script is from http://www.objsw.com/CrossGCC) would be
> > > extremely appreciated.
> >
> > ----------------------------------------
> > Content-Type: text/html; charset="iso-8859-1"; name="Attachment: 1"
> > Content-Transfer-Encoding: 7bit
> > Content-Description:
> > ----------------------------------------
> >
> > ----------------------------------------
> > Content-Type: text/plain; charset="us-ascii"; name="Attachment: 2"
> > Content-Transfer-Encoding: 7bit
> > Content-Description:
> > ----------------------------------------
> >
> > ------
> > Want more information?  See the CrossGCC FAQ,
>
> http://www.objsw.com/CrossGCC/
> Want to unsubscribe? Send a note to
> crossgcc-unsubscribe@sourceware.cygnus.com

----------------------------------------
Content-Type: text/html; charset="iso-8859-1"; name="Attachment: 1"
Content-Transfer-Encoding: 7bit
Content-Description: 
----------------------------------------

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com