This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
| Other format: | [Raw text] | |
You might like to check the following.
I have run into a case where the vxCpu.h actually has been modified to
be
__CPU__ and __CPU_FAMILY__ is changed as well
the double underscores on each side of the macro
I changed my command line to include -D__CPU__=860 and
-D__CPU_FAMILY__=PPC
Just a suggestion. I do not know why this is, only that it occurs...
Jimm Burk
jburk@peerless.com
Sr. Embedded Software Engineer
Peerless Systems Imaging Products
(253) 395-8890 ext. 50
-----Original Message-----
From: Leif Rune Solas [mailto:leifs@q-free.com]
Sent: Friday, April 12, 2002 3:32 AM
To: crossgcc@sources.redhat.com
Subject: Cross compiler, x86-linux -> powerpc-wrs-vxworks, MPC860, gcc
trouble
Hi,
I am trying to set up an powerpc-wrs-vxworks compiler hosted on a linux
pc.
My target is a MBX860 board. The cross compiler seems to have been
compiled
and installed without errors, I have used binutils 2.11.2, and
gcc-2.95.3.
Gcc was configured and installed like this:
../gcc-2.95.3/configure --target=powerpc-wrs-vxworks --enable-
long-long --with-headers=/usr/tornado/target/h --enable-languages=c,c++
make all install (have also tried "make LANGUAGES="c c++" all
install")
To make it compile I had to do some small changes to libio:
< ostream& vform(const char *format, _IO_va_list args);
---
> ostream& vform(const char *format, void * args);
in streambuf.h and iostream.h, I substituted _IO_va_list with void *
four
places.
When compiling one of my applications after doing "make all install",
this
happens and I do not understand clearly why:
---- from my shell -------------
# make depend
make[1]: Entering directory `/home/leifs/apps/KeyUtil/MrKeyUtil/obj.mbx'
powerpc-wrs-vxworks-g++ -c -mcpu=860 -fvolatile -Wall -D_MBX
-D__USE_MALLOC
-fno-builtin -msoft-float -fno-exceptions -fno-rtti
-I../../tornado/target/config -I../.. -O6 -DGZ -DGS_STATUS -I..
../App.cxx
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/types/vxANSI.h
:44,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/stdio.h:59,
from ../../MD-DES/des.h:75,
from ../App.h:3,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/types/vxCpu.h:
200:
#error CPU is not defined correctly
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/types/vxANSI.h
:45,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/stdio.h:59,
from ../../MD-DES/des.h:75,
from ../App.h:3,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/types/vxArch.h
:88:
arch/mips/archMips.h: No such file or directory
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/setjmp.h:48,
from ../../munin/MDbasicIncludes.h:45,
from ../../munin/MDmunin.h:30,
from ../App.h:4,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/regs.h:57:
arch/mips/regsMips.h: No such file or directory
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/stl_config.h:151,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/stl_algobase.h:36,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/algorithm:30,
from ../../munin/MDbasicIncludes.h:56,
from ../../munin/MDmunin.h:30,
from ../App.h:4,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../powerpc-wr
s-vxworks/sys-include/_G_config.h:35:
arch/mips/_G_configArch.h: No such file or directory
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/libio.h:30,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/streambuf.h:36,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/iostream.h:31,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/stl_algobase.h:53,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/algorithm:30,
from ../../munin/MDbasicIncludes.h:56,
from ../../munin/MDmunin.h:30,
from ../App.h:4,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../powerpc-wr
s-vxworks/sys-include/_G_config.h:35:
arch/mips/_G_configArch.h: No such file or directory
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/streambuf.h:38,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/iostream.h:31,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/stl_algobase.h:53,
from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/algorithm:30,
from ../../munin/MDbasicIncludes.h:56,
from ../../munin/MDmunin.h:30,
from ../App.h:4,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../powerpc-wr
s-vxworks/sys-include/_G_config.h:35:
arch/mips/_G_configArch.h: No such file or directory
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/taskLib.h:117,
from ../../munin/MDvxworks.h:24,
from ../../munin/MDos.h:46,
from ../../munin/MDbasicIncludes.h:85,
from ../../munin/MDmunin.h:30,
from ../App.h:4,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/excLib.h:62:
arch/mips/excMipsLib.h: No such file or directory
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/usrLib.h:56,
from ../../munin/MDvxworks.h:46,
from ../../munin/MDos.h:46,
from ../../munin/MDbasicIncludes.h:85,
from ../../munin/MDmunin.h:30,
from ../App.h:4,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/include/fppLib.h:62:
arch/mips/fppMipsLib.h: No such file or directory
In file included from
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../include/g+
+-3/cmath:6,
from ../../libg++/builtin.h:33,
from ../../libg++/MDModuleIncludes.h:5,
from ../../munin/MDmunin.h:33,
from ../App.h:4,
from ../App.cxx:5:
/usr/local/lib/gcc-lib/powerpc-wrs-vxworks/2.95.3/../../../../powerpc-wr
s-vxworks/sys-include/_G_config.h:35:
arch/mips/_G_configArch.h: No such file or directory
make[1]: *** [App.o] Error 1
make[1]: Leaving directory `/home/leifs/apps/KeyUtil/MrKeyUtil/obj.mbx'
make: *** [MrKeyUtil.module] Error 2
--------------cut-----------------------
So, it says that the cpu is not defined correctly and it complaints
about
some missing files. I do not understand why the cpu is not defined since
the
configure command should be OK, and why is it asking for files in
arch/mips/
which is not there? Has gcc somehow mixed ppc and mips due to error in
the
configuration?
I would appreciate very much comments and tips on what the problem may
be.
Regards,
Leif
--
Leif Rune Solås
R&D Engineer
Q-Free Tolling AS
Phone: +47 73826607
URL: www.q-free.com
------
Want more information? See the CrossGCC FAQ,
http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to
crossgcc-unsubscribe@sources.redhat.com
------
Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |