Re: Problems with installation of cygwin arm-elf gcc

[Bill Gatliff <bgat at billgatliff dot com>]

Vind:


Did you install Cygwin with the Unix file type as the default?

b.g.


On Fri, May 02, 2003 at 04:41:47PM +0200, Øyvind Harboe wrote:
> I'm still struggling with "make install" of gcc.
> 
> 
> Any help would be greatly appreciated! 
> 
> 
> I thought I had it sorted(rebooted the machine and I could install), but that
> was perhaps unrelated, because the problem is back again.
> 
> 
> Output and scripts I run below.
> 
> 
> - setup.sh - works fine
> - compile.sh - "make all" works, "make install" fails with error messages below
> 
> 
> Øyvind Harboe
> 
> 
> [lots of output deleted]
>   /bin/sh /home/oharboe/gcc33/gcc/install-sh -c  fixinc.sh /home/oharboe/armsize
> /install/lib/gcc-lib/arm-elf/3.3/install-tools/fixinc.sh ; \
>   /bin/sh /home/oharboe/gcc33/gcc/install-sh -c  fixinc/fixincl /home/oharboe/ar
> msize/install/lib/gcc-lib/arm-elf/3.3/install-tools/fixincl ; \
>   /bin/sh /home/oharboe/gcc33/gcc/install-sh -c -m 644 ../../../gcc33/gcc/gcc/gs
> yslimits.h /home/oharboe/armsize/install/lib/gcc-lib/arm-elf/3.3/install-tools/g
> syslimits.h ; \
> else :; fi
> chmod: changing permissions of `/home/oharboe/armsize/install/lib/gcc-lib/arm-el
> f/3.3/install-tools/_inst.2076_': No such file or directory
> if [ xstmp-fixproto != x ] ; then \
>   /bin/sh /home/oharboe/gcc33/gcc/install-sh -c  ../../../gcc33/gcc/gcc/mkinstal
> ldirs \
>         /home/oharboe/armsize/install/lib/gcc-lib/arm-elf/3.3/install-tools/mkin
> stalldirs ; \
>   /bin/sh /home/oharboe/gcc33/gcc/install-sh -c  ../../../gcc33/gcc/gcc/fixproto
>  /home/oharboe/armsize/install/lib/gcc-lib/arm-elf/3.3/install-tools/fixproto ;
> \
>   /bin/sh /home/oharboe/gcc33/gcc/install-sh -c  fix-header.exe \
>         /home/oharboe/armsize/install/lib/gcc-lib/arm-elf/3.3/install-tools/fix-
> header.exe ; \
> else :; fi
> cp: cannot create regular file `/home/oharboe/armsize/install/lib/gcc-lib/arm-el
> f/3.3/install-tools/_inst.2076_': No such file or directory
> cp: cannot create regular file `/home/oharboe/armsize/install/lib/gcc-lib/arm-el
> f/3.3/install-tools/_inst.2076_': No such file or directory
> make[1]: *** [install-mkheaders] Error 1
> make[1]: Leaving directory `/home/oharboe/armsize/build-gcc/gcc'
> make: *** [install-gcc] Error 2
> 
> 
> 
> 
> setup.sh - run first
> -------------------
> # Make directories where we do the build.
> mkdir build-binutils
> mkdir build-gcc-bare
> mkdir build-gcc
> mkdir build-newlib
> mkdir build-gdb
> mkdir install
> export TARGET=arm-elf
> export PREFIX=`pwd`/install
> export PATH=$PATH:$PREFIX/bin
> export NEWLIBPATH=`pwd`/../arm/newlib-1.9.0
> # we need the object file format tools for arm-elf 
> cd build-binutils
> ../../arm/binutils-2.13.1/configure --target=$TARGET --prefix=$PREFIX
> make all 2>&1 | tee ../binutils-make.log
> make install 2>&1 | tee ../binutils-install.log
> cd ..
> # for some reason we need to build and install the runtime
> # libraries before we compile the real compiler
> cd build-gcc-bare
> ../../gcc33/gcc/configure --target=$TARGET --prefix=$PREFIX --with-headers=$NEWLIBPATH/newlib/libc/include --with-gnu-as --with-gnu-ld --disable-shared --enable-languages=c
> make all-gcc 2>&1 | tee ../gcc-bare-make.log
> make install-gcc 2>&1 | tee ../gcc-bare-install.log
> cd ..
> # Since we are an embedded target, we need newlib instead of
> # GCCs runtime libraries
> cd build-newlib
> $NEWLIBPATH/configure --target=$TARGET --prefix=$PREFIX 
> make all 2>&1 | tee ../newlib-make.log
> make install 2>&1 | tee ../newlib-install.log
> cd ..
> echo Done!
> ----------
> 
> 
> 
> compile.sh - run to compile GCC
> --------------------
> # Make directories where we do the build.
> export TARGET=arm-elf
> export PREFIX=`pwd`/install
> export PATH=$PATH:$PREFIX/bin
> export NEWLIBPATH=`pwd`/../arm/newlib-1.9.0
> # Finally we compile our compiler 
> cd build-gcc
> #disable-nls
> #disable-jvmpi
> #disable-libffi
> #disable-interpreter
> #disable-getenv-properties
> ../../gcc33/gcc/configure --disable-nls --disable-jvmpi --disable-getenv-properties --disable-interpreter --without-x --disable-java-awt --target=$TARGET --prefix=$PREFIX --with-gnu-as --with-gnu-ld --with-newlib=yes --with-headers=$NEWLIBPATH/newlib/libc/include --enable-languages=c,c++,java
> make all 2>&1 | tee ../gcc-make.log
> make install 2>&1 | tee ../gcc-install.log
> cd ..
> echo Done!
> 
> ------
> Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
> Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com
> 
-- 
Bill Gatliff
Embedded Linux development and training services.
http://billgatliff.com

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com