This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.

See the CrossGCC FAQ for lots more information.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: newbie questions remain regarding crosstool with an arm920t target(arm_920TDI)

From: Dan Kegel <dkegel at ixiacom dot com>
To: "Wolcott, Ken (MED, Compuware)" <ken dot wolcott at med dot ge dot com>
Cc: Dan Kegel <dank at kegel dot com>, crossgcc at sources dot redhat dot com
Date: Fri, 17 Oct 2003 12:27:59 -0700
Subject: Re: newbie questions remain regarding crosstool with an arm920t target(arm_920TDI)
References: <200310171013.32818.ken.wolcott@med.ge.com> <3F900F0D.7040301@kegel.com> <200310171331.26660.ken.wolcott@med.ge.com>

Wolcott, Ken (MED, Compuware) wrote:

Changing "920t" to "arm920t" in arm920.dat unfortunately did not solve the problem as the following excerpt from demo.sh shows. Looking at the arm regular expressions shows that I can only specify an arm9 or an arm9tdmi target rather than an arm920t. Do I need to get a patch from somewhere? I know I don't have the nomenclature down pat yet, but I think I was told that arm9 instruction set might work ok for this board. This I have to confirm.


I'm afraid arm is not my specialty.  You'll have to do a little
research and/or ask the arm experts...

Glad I was able to help up to this point, at least!
- Dan


------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com

Follow-Ups:
- Re: newbie questions remain regarding crosstool with an arm920t target (arm_920TDI)
  - From: Wolcott, Ken (MED, Compuware)

References:
- newbie questions remain regarding crosstool with an arm920t target (arm_920TDI)
  - From: Wolcott, Ken (MED, Compuware)
- Re: newbie questions remain regarding crosstool with an arm920t target(arm_920TDI)
  - From: Dan Kegel
- Re: newbie questions remain regarding crosstool with an arm920t target (arm_920TDI)
  - From: Wolcott, Ken (MED, Compuware)

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]