Re: crosstool-0.28-rc37 fails to build on SuSE 9.2

[Steven Scholz <steven dot scholz at imc-berlin dot de>]

dank04@kegel.com wrote:
> Might be that gcc-3.3.3 has a 'trap' line somewhere
> in a configure script that isn't compatible with
> the new version of bash.
>
> I'm on vacation, can't look for the issue.
> - Dan
>
>
> > Hi there,
> >
> > I just tried to build an ARM cross tool chain using crosstool-0.28-rc37
> >
> > + export KERNELCONFIG=/home/scholz/crosstool-0.28-rc37/arm.config
> > + KERNELCONFIG=/home/scholz/crosstool-0.28-rc37/arm.config
> > + export TARGET=arm-softfloat-linux-gnu
> > + TARGET=arm-softfloat-linux-gnu
> > + export TARGET_CFLAGS=-O
> > + TARGET_CFLAGS=-O
> > + export GCC_EXTRA_CONFIG=--with-float=soft
> > + GCC_EXTRA_CONFIG=--with-float=soft
> > + export GLIBC_EXTRA_CONFIG=--without-fp
> > + GLIBC_EXTRA_CONFIG=--without-fp
> > + export BINUTILS_DIR=binutils-2.15
> > + BINUTILS_DIR=binutils-2.15
> > + export GCC_DIR=gcc-3.3.3
> > + GCC_DIR=gcc-3.3.3
> > + export GLIBC_DIR=glibc-2.3.2
> > + GLIBC_DIR=glibc-2.3.2
> > + export LINUX_DIR=linux-2.6.8
> > + LINUX_DIR=linux-2.6.8
> > + export GLIBCTHREADS_FILENAME=glibc-linuxthreads-2.3.2
> > + GLIBCTHREADS_FILENAME=glibc-linuxthreads-2.3.2
> >
> > but building glibc fails on my Linux SuSE 9.2!
> >
> > + cd ..
> > + echo 'Build gcc-core (just enough to build glibc)'
> > Build gcc-core (just enough to build glibc)
> > + mkdir -p build-gcc-core
> > + cd build-gcc-core
> > + test '!' -f Makefile
> > +
> > /home/scholz/crosstool-0.28-rc37/build/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3.2-linux-2.6.8/gcc-3.3.3/confi
> > gure --target=arm-softfloat-linux-gnu --host=i686-host_pc-linux-gnu
> > --prefix=/opt/crosstool/arm-softfloat-linux-gn
> > u/gcc-3.3.3-glibc-2.3.2-linux-2.6.8
> > --with-local-prefix=/opt/crosstool/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3
> > .2-linux-2.6.8/arm-softfloat-linux-gnu --disable-multilib --with-newlib
> > --with-float=soft --without-headers --disa
> > ble-nls --enable-threads=no --enable-symvers=gnu --enable-__cxa_atexit
> > --enable-languages=c --disable-shared
> > *** This configuration is not supported in the following subdirectories:
> >      target-libstdc++-v3 target-libf2c target-libffi target-boehm-gc
> > target-zlib target-libjava zlib fastjar targe
> > t-libobjc
> >     (Any other directories should still work fine.)
> > Copying no to
> > /opt/crosstool/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3.2-linux-2.6.8/arm-softfloat-linux-gnu/sys
> > -include
> > /tmp/cNf20505/cNf20505.tgt: line 821: cd: no: No such file or directory
> > Created "Makefile" in
> > /home/scholz/crosstool-0.28-rc37/build/arm-softfloat-linux-gnu/gcc-3.3.3-glibc-2.3.2-linux-2
> > .6.8/build-gcc-core using "mt-frag"
> > Configuring libiberty...
> > creating cache ../config.cache
> > ... <snip> ...
> > checking linker read-only and read-write section mixing... read-write
> > checking linker PT_GNU_EH_FRAME support... yes
> > Using ggc-page for garbage collection.
> > checking whether to enable maintainer-specific portions of Makefiles... no
> > Links are now set up to build a cross-compiler for arm-softfloat-linux-gnu
> >   from i686-host_pc-linux-gnu.
> > updating cache ../config.cache
> > creating ./config.status
> > creating Makefile
> > creating intl/Makefile
> > creating fixinc/Makefile
> > creating gccbug
> > creating mklibgcc
> > creating mkheaders
> > creating auto-host.h
> > trap: usage: trap [-lp] [[arg] signal_spec ...]

Please look at

http://linuxfromscratch.org/pipermail/lfs-hackers/2004-August/001961.html

> Hi,
> "have you seen this chicken?"
> trap: usage: trap [-lp] [[arg] signal_spec ...]
> then you use a brand new bash (>=3.0) and try to make a configure on
> some "old" stuff or on gcc (may be any version of gcc)

--
Steven

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com