This is the mail archive of the
crossgcc@sources.redhat.com
mailing list for the crossgcc project.
See the CrossGCC FAQ for lots
more information.
Re: crosstool for native compiler on new system.
- From: Clemens Koller <clemens dot koller at anagramm dot de>
- To: "Steven J. Magnani" <steve at digidescorp dot com>, crossgcc at sources dot redhat dot com
- Date: Tue, 08 Feb 2005 14:29:39 +0100
- Subject: Re: crosstool for native compiler on new system.
- Organization: Anagramm GmbH
- References: <000001c50d25$0cfebfa0$6ffea8c0@banana>
Hello, Steven!
The "error" might be spurious. The binutils build may have completed
fine - it's possible that crosstoo.sh is 'test'ing something that isn't
correct.
> My first suggestion would be to check and see what's in
> /gnusperoot.
Okay, as far as I understand, it is looking for ld in the gnusperoot
folder, which is not present at that time. I don't know if it needs
to be there at that time or not:
------8<-----same as yesterday--------------------------------------
> + cd ..
> + test -x /gnusperoot//usr/powerpc-linux-gnuspe/bin/ld
> + abort Build failed during binutils
> + echo Build failed during binutils
> Build failed during binutils
> + exec false
------8<------------------------------------------------------------
If the build did indeed fail, my next suggestion would be
to try without --nounpack.
Okay, several hours later, I tried exactly the same thing
without --nounpack
demo-e500-cross.sh followed by demo-e500-native.sh:
Then it stops pretty late in demo-e500-native.sh at:
------8<------------------------------------------------------------
/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/gcc/xgcc
-shared-libgcc -B/home/clemens/cross/c
rosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/gcc/
-nostdinc++ -L/home/clemens/cross/crosstool-0.28-rc37/build/pow
erpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnuspe/nof/libstdc++-v3/src
-L/home/clemens/cross/crosstool-0.28-rc37/build/powerp
c-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnuspe/nof/libstdc++-v3/src/.libs
-B/opt/crosstool/powerpc-linux-gnuspe/bin/ -B/opt/c
rosstool/powerpc-linux-gnuspe/lib/ -isystem
/opt/crosstool/powerpc-linux-gnuspe/include -isystem
/opt/crosstool/powerpc-linux-gnuspe/sys-include -
msoft-float -fPIC -mstrict-align
-I/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linu
x-gnuspe/nof/libstdc++-v3/include/powerpc-linux-gnuspe
-I/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/
build-gcc/powerpc-linux-gnuspe/nof/libstdc++-v3/include
-I/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3
/gcc-3.4.3/libstdc++-v3/libsupc++ -O2 -g -O2 -g -O2 -D_GNU_SOURCE
-msoft-float -fPIC -mstrict-align -fno-implicit-templates -Wall -W
-Wwrite-strin
gs -Wcast-qual -fdiagnostics-show-location=once -ffunction-sections
-fdata-sections -c
/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux
-gnuspe/gcc-3.4.3-glibc-2.3.3/gcc-3.4.3/libstdc++-v3/src/locale_init.cc
-o locale_init.o >/dev/null 2>&1
make[6]: *** [locale_init.lo] Error 1
make[6]: Leaving directory
`/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnusp
e/nof/libstdc++-v3/src'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory
`/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnusp
e/nof/libstdc++-v3'
make[4]: *** [all] Error 2
make[4]: Leaving directory
`/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnusp
e/nof/libstdc++-v3'
make[3]: *** [multi-do] Error 1
make[3]: Leaving directory
`/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnusp
e/libstdc++-v3'
make[2]: *** [all-multi] Error 2
make[2]: Leaving directory
`/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnusp
e/libstdc++-v3'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/home/clemens/cross/crosstool-0.28-rc37/build/powerpc-linux-gnuspe/gcc-3.4.3-glibc-2.3.3/build-gcc/powerpc-linux-gnusp
e/libstdc++-v3'
make: *** [all-target-libstdc++-v3] Error 2
------8<------------------------------------------------------------
Then I tried to cd into
...build-gcc/powerpc-linux-gnuspe/nof/libstdc++-v3/src
and did a 'make all' which worked fine...
So I cannot really see why it stopped... with an EPERM?
But then I don't know how to finish the build. If I try to work without
--nounpack I end up as yesterday (see above).
So - I got stuck again! :-*
Actually, I am really worried if all that work is really the straight
way to migrate (completely replace) my gcc-3.3.3+binutils 2.14 without
FP support to the gcc-3.4.3+binutils 2.15 with e500/spe to get our
own code efficiently working on our target.
Is there no easier way to achieve that? Well, I am pretty new to
compiling compilers and it's good to learn while doing things (and to
get help from others) but I run out of time to try things without
being sure if there is a valuable result in the end. Can you
recommend me 'the way' to go for... It doesn't need to be the
fastest one, but I need to get my work done.
Is there any more literature to read beside gcc.gnu.org/* and the
little crossgcc-wiki?
Is there another way to get efficient code for the MPC8540?
Best greets, and thanks...
Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19
------
Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com