This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hello All, Thanks for all the help... I got glibc installed, but I couldnot get my problem solved completely. When, I compile and link from the command line, I could create elf and rec output format files to load onto my AMD Au1550 MIPS board. but, when I try to load the image, it says "no match found in TLB for the mapped address". I am giving the commands I am using mipsel-linux-gcc -c main.c -I/usr/include mipsel-linux-gcc -nostartfiles /home/Uday/GLIBC/usr/lib/crti.o /home/Uday/GLIBC/usr/lib/crt1.o -L/home/Uday/GLIBC/usr/lib -L/home/Uday/GLIBC/lib -o main.elf main.o mipsel-linux-objcopy -S -O srec main.elf main.rec but main.rec doesnot load onto the board when using YAMON Is there any problem with the linking. I know this error occurs when the start adress of .text section is not correct. but, how do I specify the start adress using gcc (instead of LD). When I use a makefile instead of linking from the commnad line, the linker crashes with segmentation fault. This is what I get mipsel-linux-gcc -nostartfiles /home/Uday/GLIBC/usr/lib/crti.o /home/Uday/GLIBC/usr/lib/crt1.o -L/home/Uday/GLIBC/usr/lib -L/home/Uday/GLIBC/lib -o main.elf main.o [root@localhost hello]# make clean all rm -f *.o hello.elf hello.srec hello.bin mipsel-linux-gcc -O -G 0 -Wall -I/usr/include -c main.c -o main.o main.c:17: warning: return type defaults to `int' mipsel-linux-gcc -nostartfiles /home/Uday/GLIBC/usr/lib/crt1.o /home/Uday/GLIBC/usr/lib/crti.o -o hello.elf -nodefaultlibs -L /home/Uday/GLIBC/usr/lib -L /home/Uday/GLIBC/lib collect2: ld terminated with signal 11 [Segmentation fault] make: *** [hello.elf] Error 1 I am including the make file for your reference... LOADADDR = 0xa0040000 RAMSIZE = 0x00100000 # 1MB CROSS_COMPILE = mipsel-linux- ######## END OF CONFIGURATION ######### .c.o: $(CC) $(CFLAGS) -c $< -o $*.o CC = $(CROSS_COMPILE)gcc LD = $(CROSS_COMPILE)ld OBJCOPY = $(CROSS_COMPILE)objcopy OBJDUMP = $(CROSS_COMPILE)objdump CFLAGS = -O -G 0 -Wall -I/usr/include # Drop some uninteresting sections in the kernel. # This is only relevant for ELF kernels but doesn't hurt a.out #drop-sections = .reginfo .mdebug #strip-flags = $(addprefix --remove-section=,$(drop-sections)) all : elf srec bin srec : hello.srec elf : hello.elf bin : hello.bin hello.elf : main.o $(LD) -nostartfiles /home/Uday/GLIBC/usr/lib/crt1.o /home/Uday/GLIBC/usr/lib/crti.o -o hello.elf -nodefaultlibs -L /home/Uday/GLIBC/usr/lib -L /home/Uday/GLIBC/lib hello.srec : hello.elf $(OBJCOPY) -S -O srec $(strip-flags) hello.elf hello.srec hello.bin : hello.elf $(OBJCOPY) -S -O binary $(strip-flags) hello.elf hello.bin clean: rm -f *.o hello.elf hello.srec hello.bin If I could get this makefile running, I know I could specify the start address using -T option from the gcc linker LD...... May be , I am missing something or there is something wrong in my makefile bcoz of my inexperience in writing makefiles.......Any help would be appreciated........Thank you - Pati -- Sent from the Sourceware - crossgcc list forum at Nabble.com: http://www.nabble.com/crt1.o-not-found-in-mipsel-linux-t705223.html#a1911252 ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |