This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hi there. I'm a bit new to the cross compiling scene, and am trying to put together a compiler for the Atmel AT91SAM9260, and later for the 9263. I came across Crosstool-NG after working on my own set of scripts for a while, but I am hitting a hard stop on both fronts. Can anyone offer any advice for doing this? Preferably I'd like to be as up to date as possible. My own scripts are using kernel 2.6.26, glibc-2.7, gcc-4.3.2, eabi, nptl, but those are failing to compile properly at this point. The latest version of Crosstool-NG (a fantastic piece of work btw, and one I wish I'd come across sooner!) is compiling everything up just fine using a config based on one of the demo's, but my kernel fails to boot. As in: Starting kernel ... And then hangs. This is an image file produced by the mkimage utitlity for u-boot. I have used the Code Sourcery and Timesys compilers to build kernels for this hardware before, so the problem is most definitely my compiler, I must be getting a setting or a patch wrong somewhere. Does anyone have any advice? Regards, Jake Knickerbocker -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |