This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hi Yann, Any thoughts on the following? The patch worked but my "install strip" step still failed. Best regards, Trevor PS for the last couple days I have been receiving bounce messages from anciens.enib.fr, so I'm not sure if you saw this reply previously. On Tue, Nov 29, 2011 at 9:46 PM, Trevor Woerner <twoerner@gmail.com> wrote: > (sorry, forgot the CC the list) > > > ---------- Forwarded message ---------- > From: Trevor Woerner <twoerner@gmail.com> > Date: Tue, Nov 29, 2011 at 9:45 PM > Subject: Re: build failure in native gdb with crosstool-ng-1.13.1 on > openSUSE 12.1 > To: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> > > > Hi Yann, > > On Tue, Nov 29, 2011 at 5:53 PM, Yann E. MORIN > <yann.morin.1998@anciens.enib.fr> wrote: >> What target are youbuilding for? Could you post your .config, please? > > arm-cortex_a8-linux-gnueabi > > I have attached the config, but it's pretty much exactly the sample > directly from ct-ng. The only changes are a couple path tweaks, and to > enable make-3.81. > >> I never encountered this issue, but it can make sense if the target >> architecture is 64-bit, in which case the libraries could be installed >> in the lib64 sub-directory > > The target is 32-bit ARM, the host is 64-bit x86. > > If it's of any use I've attached the results of performing "gcc -v" on > both 11.4 and 12.1. The only notable difference is that 11.4 enabled > gold and 12.1 doesn't. > >> Care to test the attached patch, please? > > I have tested the patch and it works as well as my manual tweak; > native gdb now builds, but it still fails in the strip step. > >>> The build then fails a little later (during cleanup, stripping all >>> binaries) but I haven't looking into that yet to provide much >>> information. >> >> Probably again an issue with lib vs. lib64 confusion along the road... > > I'm not sure what's going on here. I have attached the last part of > the build log (hoping it's enough for your purposes). > > Best regards, > ? ?Trevor -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |