This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.

See the CrossGCC FAQ for lots more information.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: libstdc++ configure fail due to -EL option

From: Zhenqiang Chen <zhenqiang dot chen at linaro dot org>
To: "Yann E. MORIN" <yann dot morin dot 1998 at free dot fr>
Cc: Bryan Hundven <bryanhundven at gmail dot com>, crossgcc at sourceware dot org, Khem Raj <raj dot khem at gmail dot com>
Date: Wed, 18 Jan 2012 16:51:42 +0800
Subject: Re: libstdc++ configure fail due to -EL option
References: <CACgzC7CZ_Ejrr_trorc04VfFX1qRBnp92C0=Yx3KvbvDHmzHrA@mail.gmail.com> <201201180901.56593.yann.morin.1998@free.fr> <CAJ+oik0gsKpXgzR4cOxhyujv+=H-fuFsuhRouch9T2hz73U2FA@mail.gmail.com> <201201180947.26502.yann.morin.1998@free.fr>

The .config and config.log are attached. (In .config, I use 4.6.2 for
gcc trunk as workaround).

In config.log, the final error is
  error: Link tests are not allowed after GCC_NO_EXECUTABLES

In config.log, you can find lots of error:
  xgcc: error: unrecognized command line option '-EL'

I compare gcc-4.6 and trunk configure. Seam gcc-4.6 has bugs.
LDFLAGS_FOR_TARGET is always empty. gcc-4.6 can build. And from
trunk's ChangeLog, you can find

2011-05-08  Doug Kwan  <dougkwan@google.com>

        * configure.ac: Propagate LDFLAGS_FOR_TARGET.

I am not sure option '-EL' is the root cause. But without it, the
trunk can build.

Thanks!
-Zhenqiang

Attachment: .config
Description: Binary data

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by package-unused configure version-unused, which was
generated by GNU Autoconf 2.64.  Invocation command line was

  $ /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/libstdc++-v3/configure --cache-file=./config.cache --with-cross-host=i686-build_pc-linux-gnu --prefix=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install --with-sysroot=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/libc --disable-multilib --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3-d16 --with-float=softfp --with-pkgversion=crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2012.01 --with-bugurl=https://bugs.launchpad.net/gcc-linaro --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --with-libelf=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-host-libstdcxx=-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static/lib -lpwl --enable-threads=posix --disable-libstdcxx-pch --enable-linker-build-id --enable-gold --disable-nls --with-local-prefix=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/libc --enable-c99 --enable-long-long --with-mode=thumb --enable-languages=c,c++,fortran,lto --program-transform-name=s&^&arm-linux-gnueabi-& --disable-option-checking --with-target-subdir=arm-linux-gnueabi --build=i686-build_pc-linux-gnu --host=arm-linux-gnueabi --target=arm-linux-gnueabi --srcdir=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/libstdc++-v3

## --------- ##
## Platform. ##
## --------- ##

hostname = ubuntu
uname -m = i686
uname -r = 2.6.32-37-generic-pae
uname -s = Linux
uname -v = #81-Ubuntu SMP Fri Dec 2 22:24:22 UTC 2011

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/buildtools/bin
PATH: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/bin
PATH: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/gcc-core-shared/bin
PATH: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/gcc-core-static/bin
PATH: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2743: creating cache ./config.cache
configure:2909: checking build system type
configure:2923: result: i686-build_pc-linux-gnu
configure:2943: checking host system type
configure:2956: result: arm-unknown-linux-gnueabi
configure:2976: checking target system type
configure:2989: result: arm-unknown-linux-gnueabi
configure:3074: checking for a BSD-compatible install
configure:3142: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/install -c
configure:3153: checking whether build environment is sane
configure:3203: result: yes
configure:3252: checking for arm-linux-gnueabi-strip
configure:3279: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/strip
configure:3344: checking for a thread-safe mkdir -p
configure:3383: result: /bin/mkdir -p
configure:3396: checking for gawk
configure:3423: result: gawk
configure:3434: checking whether /usr/bin/make sets $(MAKE)
configure:3456: result: yes
configure:3543: checking for arm-linux-gnueabi-gcc
configure:3570: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include   
configure:3839: checking for C compiler version
configure:3848: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    --version >&5
xgcc (crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2012.01) 4.7.0 20120116 (experimental)
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3859: $? = 0
configure:3848: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -v >&5
Reading specs from /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/specs
COLLECT_GCC=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc
COLLECT_LTO_WRAPPER=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/lto-wrapper
Target: arm-linux-gnueabi
Configured with: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-linux-gnueabi --prefix=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install --with-sysroot=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/libc --enable-languages=c,c++,fortran --disable-multilib --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3-d16 --with-float=softfp --with-pkgversion='crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2012.01' --with-bugurl=https://bugs.launchpad.net/gcc-linaro --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --with-gmp=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-mpfr=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-mpc=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-ppl=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-cloog=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-libelf=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static/lib -lpwl' --enable-threads=posix --disable-libstdcxx-pch --enable-linker-build-id --enable-gold --disable-nls --with-local-prefix=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/libc --enable-c99 --enable-long-long --with-mode=thumb
Thread model: posix
gcc version 4.7.0 20120116 (experimental) (crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2012.01) 
configure:3859: $? = 0
configure:3848: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -V >&5
xgcc: error: unrecognized command line option '-V'
xgcc: fatal error: no input files
compilation terminated.
configure:3859: $? = 1
configure:3848: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -qversion >&5
xgcc: error: unrecognized command line option '-qversion'
xgcc: fatal error: no input files
compilation terminated.
configure:3859: $? = 1
configure:3875: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -o conftest -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   -EL  conftest.c  >&5
xgcc: error: unrecognized command line option '-EL'
configure:3878: $? = 1
configure:4066: checking for suffix of object files
configure:4088: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:4092: $? = 0
configure:4113: result: o
configure:4117: checking whether we are using the GNU C compiler
configure:4136: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:4136: $? = 0
configure:4145: result: yes
configure:4154: checking whether /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    accepts -g
configure:4174: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -g  conftest.c >&5
configure:4174: $? = 0
configure:4215: result: yes
configure:4232: checking for /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    option to accept ISO C89
configure:4296: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include     -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:4296: $? = 0
configure:4309: result: none needed
configure:4441: checking for C++ compiler version
configure:4450:  /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    --version >&5
xgcc (crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2012.01) 4.7.0 20120116 (experimental)
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4461: $? = 0
configure:4450:  /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -v >&5
Reading specs from /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/specs
COLLECT_GCC=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc
COLLECT_LTO_WRAPPER=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/lto-wrapper
Target: arm-linux-gnueabi
Configured with: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-linux-gnueabi --prefix=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install --with-sysroot=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/libc --enable-languages=c,c++,fortran --disable-multilib --with-arch=armv7-a --with-tune=cortex-a9 --with-fpu=vfpv3-d16 --with-float=softfp --with-pkgversion='crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2012.01' --with-bugurl=https://bugs.launchpad.net/gcc-linaro --enable-__cxa_atexit --disable-libmudflap --disable-libgomp --disable-libssp --with-gmp=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-mpfr=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-mpc=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-ppl=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-cloog=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-libelf=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/static/lib -lpwl' --enable-threads=posix --disable-libstdcxx-pch --enable-linker-build-id --enable-gold --disable-nls --with-local-prefix=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/libc --enable-c99 --enable-long-long --with-mode=thumb
Thread model: posix
gcc version 4.7.0 20120116 (experimental) (crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2012.01) 
configure:4461: $? = 0
configure:4450:  /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -V >&5
xgcc: error: unrecognized command line option '-V'
xgcc: fatal error: no input files
compilation terminated.
configure:4461: $? = 1
configure:4450:  /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -qversion >&5
xgcc: error: unrecognized command line option '-qversion'
xgcc: fatal error: no input files
compilation terminated.
configure:4461: $? = 1
configure:4465: checking whether we are using the GNU C++ compiler
configure:4484:  /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -g -O2 -D_GNU_SOURCE -fno-builtin  conftest.cpp >&5
configure:4484: $? = 0
configure:4493: result: yes
configure:4502: checking whether  /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    accepts -g
configure:4522:  /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -g  conftest.cpp >&5
configure:4522: $? = 0
configure:4563: result: yes
configure:4596: checking how to run the C preprocessor
configure:4627: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -E  conftest.c
configure:4627: $? = 0
configure:4641: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -E  conftest.c
conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:4641: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "package-unused"
| #define PACKAGE_TARNAME "libstdc++"
| #define PACKAGE_VERSION "version-unused"
| #define PACKAGE_STRING "package-unused version-unused"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:4666: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -E
configure:4686: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -E  conftest.c
configure:4686: $? = 0
configure:4700: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -E  conftest.c
conftest.c:9:28: fatal error: ac_nonexistent.h: No such file or directory
compilation terminated.
configure:4700: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "package-unused"
| #define PACKAGE_TARNAME "libstdc++"
| #define PACKAGE_VERSION "version-unused"
| #define PACKAGE_STRING "package-unused version-unused"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:4729: checking for grep that handles long lines and -e
configure:4787: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep
configure:4792: checking for egrep
configure:4854: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep -E
configure:4906: checking whether ln -s works
configure:4910: result: yes
configure:4922: checking for arm-linux-gnueabi-as
configure:4949: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/as
configure:5014: checking for arm-linux-gnueabi-ar
configure:5041: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ar
configure:5106: checking for arm-linux-gnueabi-ranlib
configure:5133: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ranlib
configure:5197: checking whether to enable maintainer-specific portions of Makefiles
configure:5206: result: no
configure:5267: CPU config directory is cpu/arm
configure:5269: OS config directory is os/gnu-linux
configure:5326: checking how to print strings
configure:5353: result: printf
configure:5374: checking for a sed that does not truncate output
configure:5438: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/sed
configure:5456: checking for fgrep
configure:5518: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep -F
configure:5553: checking for ld used by /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include   
configure:5620: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/collect-ld
configure:5627: checking if the linker (/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/collect-ld) is GNU ld
configure:5642: result: yes
configure:5654: checking for BSD- or MS-compatible name lister (nm)
configure:5703: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm
configure:5833: checking the name lister (/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm) interface
configure:5840: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:5843: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm "conftest.o"
configure:5846: output
00000000 B some_variable
configure:5853: result: BSD nm
configure:5857: checking the maximum length of command line arguments
configure:5982: result: 805306365
configure:5999: checking whether the shell understands some XSI constructs
configure:6009: result: yes
configure:6013: checking whether the shell understands "+="
configure:6019: result: yes
configure:6054: checking for /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/collect-ld option to reload object files
configure:6061: result: -r
configure:6090: checking for arm-linux-gnueabi-objdump
configure:6117: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/objdump
configure:6189: checking how to recognize dependent libraries
configure:6390: result: pass_all
configure:6410: checking for arm-linux-gnueabi-ar
configure:6437: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ar
configure:6515: checking for arm-linux-gnueabi-strip
configure:6542: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/strip
configure:6614: checking for arm-linux-gnueabi-ranlib
configure:6641: result: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ranlib
configure:6783: checking command to parse /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm output from /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    object
configure:6901: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:6904: $? = 0
configure:6908: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:6911: $? = 0
configure:6965: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -o conftest -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   -EL  conftest.c conftstm.o >&5
xgcc: error: unrecognized command line option '-EL'
configure:6968: $? = 1
configure:6901: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:6904: $? = 0
configure:6908: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1 _\2 \2/p' \> conftest.nm
configure:6911: $? = 0
cannot run sed -n -e 's/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1 _\2 \2/p'
configure:7003: result: failed
configure:7845: checking for ANSI C header files
configure:7865: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7865: $? = 0
configure:7949: result: yes
configure:7962: checking for sys/types.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for sys/stat.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for stdlib.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for string.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for memory.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for strings.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for inttypes.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for stdint.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7962: checking for unistd.h
configure:7962: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7962: $? = 0
configure:7962: result: yes
configure:7977: checking for dlfcn.h
configure:7977: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:7977: $? = 0
configure:7977: result: yes
configure:8163: checking for objdir
configure:8178: result: .libs
configure:8449: checking if /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    supports -fno-rtti -fno-exceptions
configure:8467: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C [enabled by default]
configure:8471: $? = 0
configure:8484: result: no
configure:8504: checking for /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    option to produce PIC
configure:8789: result: -fPIC -DPIC
configure:8801: checking if /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    PIC flag -fPIC -DPIC works
configure:8819: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   -fPIC -DPIC -DPIC conftest.c >&5
configure:8823: $? = 0
configure:8836: result: yes
configure:8860: checking if /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    static flag -static works
configure:8888: result: no
configure:8903: checking if /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    supports -c -o file.o
configure:8924: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   -o out/conftest2.o conftest.c >&5
configure:8928: $? = 0
configure:8950: result: yes
configure:8958: checking if /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    supports -c -o file.o
configure:9005: result: yes
configure:9038: checking whether the /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    linker (/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/collect-ld) supports shared libraries
configure:10118: result: yes
configure:10155: checking whether -lc should be explicitly linked in
configure:10163: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -c -mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp   conftest.c >&5
configure:10166: $? = 0
configure:10181: /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep  -lc  \>/dev/null 2\>\&1
configure:10184: $? = 0
configure:10198: result: no
configure:10363: checking dynamic linker characteristics
configure:10804: error: Link tests are not allowed after GCC_NO_EXECUTABLES.

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=i686-build_pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=set
ac_cv_env_CC_value='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include   '
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp '
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFILT_set=
ac_cv_env_CXXFILT_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-g -O2 -D_GNU_SOURCE'
ac_cv_env_CXX_set=set
ac_cv_env_CXX_value=' /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include   '
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-EL '
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=i686-build_pc-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=arm-linux-gnueabi
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=arm-linux-gnueabi
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=arm-unknown-linux-gnueabi
ac_cv_objext=o
ac_cv_path_EGREP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep -E'
ac_cv_path_FGREP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep -F'
ac_cv_path_GREP=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep
ac_cv_path_SED=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/sed
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AR=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ar
ac_cv_prog_AS=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/as
ac_cv_prog_AWK=gawk
ac_cv_prog_CC='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include   '
ac_cv_prog_CPP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -E'
ac_cv_prog_OBJDUMP=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/objdump
ac_cv_prog_RANLIB=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ranlib
ac_cv_prog_STRIP=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/strip
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
ac_cv_prog_make__usr_bin_make_set=yes
ac_cv_target=arm-unknown-linux-gnueabi
lt_cv_archive_cmds_need_lc=no
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/collect-ld
lt_cv_path_NM=/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=no
lt_cv_prog_gnu_ld=yes
lt_cv_shlibpath_overrides_runpath=no
lt_cv_sys_global_symbol_pipe=
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/  {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"lib\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl=
lt_cv_sys_max_cmd_len=805306365

## ----------------- ##
## Output variables. ##
## ----------------- ##

ABI_TWEAKS_SRCDIR=''
ACLOCAL='${SHELL} /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/missing --run aclocal-1.11'
ALLOCATOR_H=''
ALLOCATOR_NAME=''
AMTAR='${SHELL} /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/missing --run tar'
AR='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ar'
AS='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/as'
ATOMICITY_SRCDIR=''
ATOMIC_FLAGS=''
ATOMIC_WORD_SRCDIR=''
AUTOCONF='${SHELL} /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/missing --run autoconf'
AUTOHEADER='${SHELL} /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/missing --run autoheader'
AUTOMAKE='${SHELL} /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/missing --run automake-1.11'
AWK='gawk'
BASIC_FILE_CC=''
BASIC_FILE_H=''
BUILD_EPUB_FALSE=''
BUILD_EPUB_TRUE=''
BUILD_HTML_FALSE=''
BUILD_HTML_TRUE=''
BUILD_INFO_FALSE=''
BUILD_INFO_TRUE=''
BUILD_MAN_FALSE=''
BUILD_MAN_TRUE=''
BUILD_PDF_FALSE=''
BUILD_PDF_TRUE=''
BUILD_XML_FALSE=''
BUILD_XML_TRUE=''
CC='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include   '
CCODECVT_CC=''
CCOLLATE_CC=''
CCTYPE_CC=''
CFLAGS='-mlittle-endian -march=armv7-a   -mtune=cortex-a9 -mfpu=vfpv3-d16 -mfloat-abi=softfp '
CLOCALE_CC=''
CLOCALE_H=''
CLOCALE_INTERNAL_H=''
CMESSAGES_CC=''
CMESSAGES_H=''
CMONEY_CC=''
CNUMERIC_CC=''
CPP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include    -E'
CPPFLAGS=''
CPU_DEFINES_SRCDIR=''
CSTDIO_H=''
CTIME_CC=''
CTIME_H=''
CXX=' /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/xgcc -shared-libgcc -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc -nostdinc++ -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src -L/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/src/.libs -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ -B/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/lib/ -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/include -isystem /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/sys-include   '
CXXCPP=''
CXXFILT=''
CXXFLAGS='-g -O2 -D_GNU_SOURCE'
CYGPATH_W='echo'
C_INCLUDE_DIR=''
DBLATEX=''
DBTOEPUB=''
DEBUG_FLAGS=''
DEFS=''
DOT=''
DOXYGEN=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep -E'
ENABLE_EXTERN_TEMPLATE_FALSE=''
ENABLE_EXTERN_TEMPLATE_TRUE=''
ENABLE_PARALLEL_FALSE=''
ENABLE_PARALLEL_TRUE=''
ENABLE_SYMVERS_DARWIN_FALSE=''
ENABLE_SYMVERS_DARWIN_TRUE=''
ENABLE_SYMVERS_FALSE=''
ENABLE_SYMVERS_GNU_FALSE=''
ENABLE_SYMVERS_GNU_NAMESPACE_FALSE=''
ENABLE_SYMVERS_GNU_NAMESPACE_TRUE=''
ENABLE_SYMVERS_GNU_TRUE=''
ENABLE_SYMVERS_SOL2_FALSE=''
ENABLE_SYMVERS_SOL2_TRUE=''
ENABLE_SYMVERS_SUN_FALSE=''
ENABLE_SYMVERS_SUN_TRUE=''
ENABLE_SYMVERS_TRUE=''
ENABLE_VISIBILITY_FALSE=''
ENABLE_VISIBILITY_TRUE=''
ERROR_CONSTANTS_SRCDIR=''
EXEEXT=''
EXTRA_CXX_FLAGS=''
FGREP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep -F'
GLIBCXX_BUILD_DEBUG_FALSE=''
GLIBCXX_BUILD_DEBUG_TRUE=''
GLIBCXX_BUILD_PCH_FALSE=''
GLIBCXX_BUILD_PCH_TRUE=''
GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE=''
GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE=''
GLIBCXX_C_HEADERS_C_FALSE=''
GLIBCXX_C_HEADERS_C_GLOBAL_FALSE=''
GLIBCXX_C_HEADERS_C_GLOBAL_TRUE=''
GLIBCXX_C_HEADERS_C_STD_FALSE=''
GLIBCXX_C_HEADERS_C_STD_TRUE=''
GLIBCXX_C_HEADERS_C_TRUE=''
GLIBCXX_HOSTED_FALSE=''
GLIBCXX_HOSTED_TRUE=''
GLIBCXX_INCLUDES=''
GLIBCXX_LDBL_COMPAT_FALSE=''
GLIBCXX_LDBL_COMPAT_TRUE=''
GLIBCXX_LIBS=''
GREP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/grep'
INSTALL_DATA='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/install -c -m 644'
INSTALL_PROGRAM='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/install -c'
INSTALL_SCRIPT='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/install -c'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/collect-ld'
LDFLAGS='-EL  -Wl,-rpath -Wl,/foo'
LIBICONV=''
LIBOBJS=''
LIBS=''
LIBSUPCXX_PICFLAGS=''
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIPO='arm-linux-gnueabi-lipo'
LN_S='ln -s'
LTLIBICONV=''
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='makeinfo --split-size=5000000'
MKDIR_P='/bin/mkdir -p'
NM='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/./gcc/nm'
NMEDIT=''
OBJDUMP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/objdump'
OBJEXT='o'
OPTIMIZE_CXXFLAGS=''
OPT_LDFLAGS=''
OS_INC_SRCDIR=''
OTOOL64=''
OTOOL=''
PACKAGE='libstdc++'
PACKAGE_BUGREPORT=''
PACKAGE_NAME='package-unused'
PACKAGE_STRING='package-unused version-unused'
PACKAGE_TARNAME='libstdc++'
PACKAGE_URL=''
PACKAGE_VERSION='version-unused'
PATH_SEPARATOR=':'
PDFLATEX=''
RANLIB='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/ranlib'
RUBY=''
SECTION_FLAGS=''
SECTION_LDFLAGS=''
SED='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/tools/bin/sed'
SET_MAKE=''
SHELL='/bin/bash'
STRIP='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install/arm-linux-gnueabi/bin/strip'
SYMVER_FILE=''
TOPLEVEL_INCLUDES=''
USE_NLS=''
VERSION='version-unused'
WARN_FLAGS=''
WERROR=''
XMLLINT=''
XSLTPROC=''
XSL_STYLE_DIR=''
ac_ct_CC=''
ac_ct_CXX=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__isrc=' -I$(srcdir)'
am__leading_dot='.'
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
baseline_dir=''
baseline_subdir_switch=''
bindir='${exec_prefix}/bin'
build='i686-build_pc-linux-gnu'
build_alias='i686-build_pc-linux-gnu'
build_cpu='i686'
build_os='linux-gnu'
build_vendor='build_pc'
check_msgfmt=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
enable_shared='yes'
enable_static='yes'
exec_prefix='NONE'
glibcxx_MOFILES=''
glibcxx_PCHFLAGS=''
glibcxx_POFILES=''
glibcxx_builddir='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3'
glibcxx_localedir=''
glibcxx_prefixdir=''
glibcxx_srcdir='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/libstdc++-v3'
glibcxx_toolexecdir=''
glibcxx_toolexeclibdir=''
gxx_include_dir=''
host='arm-unknown-linux-gnueabi'
host_alias='arm-linux-gnueabi'
host_cpu='arm'
host_os='linux-gnueabi'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/install-sh'
libdir='/foo'
libexecdir='${exec_prefix}/libexec'
libtool_VERSION=''
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
lt_host_flags=''
mandir='${datarootdir}/man'
mkdir_p='/bin/mkdir -p'
multi_basedir='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/libstdc++-v3/..'
oldincludedir='/usr/include'
pdfdir='${docdir}'
port_specific_symbol_files='$(srcdir)/../config/os/gnu-linux/arm-eabi-extra.ver'
prefix='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/install'
program_transform_name='s&^&arm-linux-gnueabi-&'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='arm-unknown-linux-gnueabi'
target_alias='arm-linux-gnueabi'
target_cpu='arm'
target_os='linux-gnueabi'
target_vendor='unknown'
toplevel_builddir='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/arm-linux-gnueabi/build/build-cc/arm-linux-gnueabi/libstdc++-v3/..'
toplevel_srcdir='/home/zheche01/linaro/builds/arm-linux-gnueabi-linux/.build/src/gcc-4.6.2/libstdc++-v3/..'

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME "package-unused"
#define PACKAGE_TARNAME "libstdc++"
#define PACKAGE_VERSION "version-unused"
#define PACKAGE_STRING "package-unused version-unused"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"

configure: exit 1

--
For unsubscribe information see http://sourceware.org/lists.html#faq

References:
- libstdc++ configure fail due to -EL option
  - From: Zhenqiang Chen
- Re: libstdc++ configure fail due to -EL option
  - From: Yann E. MORIN
- Re: libstdc++ configure fail due to -EL option
  - From: Yann E. MORIN

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]