This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.

See crosstool-NG for lots more information.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: crosstool-ng 1.16.0: libtool problem

Hi Bryan,

I found in Google similar threads.
Do you think it will be solved soon ?
Or should I upgrade my CENTOS to 6.x and hope for better results ?

Thanks,
Zvika.

-----Original Message----- From: Bryan Hundven
Sent: Sunday, October 07, 2012 8:18 AM
To: Zvi Vered
Cc: crossgcc@sourceware.org
Subject: Re: crosstool-ng 1.16.0: libtool problem

On Sat, Oct 6, 2012 at 11:12 PM, Zvi Vered <veredz72@gmail.com> wrote:
Hi Bryan,

I just sent the file using https://www.transferbigfiles.com. 

I have posted the build.log here:
http://bryanhundven.com/zvi-build.log

for anyone else to view it.

-Bryan

Thanks,
Zvika

On Sun, Oct 7, 2012 at 6:27 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
On Sat, Oct 6, 2012 at 8:38 PM, Zvi Vered <veredz72@gmail.com> wrote:
Hi Bryan,

Attached the new .config
Now I got the following error:

Zvika,

Please post the full log to pastebin or similar site.

Thanks,

-Bryan

[ALL ] ./libtool: line 466: CDPATH: command not found
[ALL ] ./libtool: line 466: CDPATH: command not found
[ALL ] ./libtool: line 1144: func_opt_split: command not found
[ALL ] libtool: Version mismatch error. This is libtool 2.2.6
Debian-2.2.6a-1ubuntu1, but the
[ALL ] libtool: definition of this LT_INIT comes from an older release.
[ALL ] libtool: You should recreate aclocal.m4 with macros from
libtool 2.2.6 Debian-2.2.6a-1ubuntu1
[ALL ] libtool: and run autoconf again.
[ERROR] make[1]: *** [block.lo] Error 1
[ALL ] make[1]: *** Waiting for unfinished jobs....
[ALL ] ./libtool: line 466: CDPATH: command not found
[ALL ] ./libtool: line 1144: func_opt_split: command not found
[ALL ] libtool: Version mismatch error. This is libtool 2.2.6
Debian-2.2.6a-1ubuntu1, but the
[ALL ] libtool: definition of this LT_INIT comes from an older release.
[ALL ] libtool: You should recreate aclocal.m4 with macros from
libtool 2.2.6 Debian-2.2.6a-1ubuntu1
[ALL ] libtool: and run autoconf again.
[ERROR] make[1]: *** [names.lo] Error 1
[ALL ] ./libtool: line 1144: func_opt_split: command not found
[ALL ] libtool: Version mismatch error. This is libtool 2.2.6
Debian-2.2.6a-1ubuntu1, but the
[ALL ] libtool: definition of this LT_INIT comes from an older release.
[ALL ] libtool: You should recreate aclocal.m4 with macros from
libtool 2.2.6 Debian-2.2.6a-1ubuntu1
[ALL ] libtool: and run autoconf again.
[ERROR] make[1]: *** [loop.lo] Error 1
[ALL ] make[1]: Leaving directory
`/home/zvivered/GNU/ct-ng-1.16.0/bin/.build/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu'
[ERROR]
[ERROR] >>
[ERROR] >> Build failed in step 'Installing CLooG/PPL for host'
[ERROR] >> called in step '(top-level)'
[ERROR] >>
[ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@158]
[ERROR] >> called from:
do_cloog_backend[scripts/build/companion_libs/cloog.sh@111]
[ERROR] >> called from:
do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72]
[ERROR] >> called from: main[scripts/crosstool-NG.sh@598]
[ERROR] >>
[ERROR] >> For more info on this error, look at the file: 'build.log'
[ERROR] >> There is a list of known issues, some with workarounds, in:
[ERROR] >>
'/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B
- Known issues.txt'
[ERROR]

I did not install libtool manually. I have one libtool installed by CENTOS:
ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)

I installed automake 1.10, autoconf 2.60 ***manually*** because
crosstool-ng failed at earlier stages. (./configure, make, make
install). But when I checked "companion tools", crosstool should
ignore them. Am I right ?

Can you help ?

Thanks,
Zvika


On Sun, Oct 7, 2012 at 3:24 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
Zvika

On Sat, Oct 6, 2012 at 4:23 PM, Zvi Vered <veredz72@gmail.com> wrote:
Hi Bryan,

Did you mean:
./configure --prefix=$HOME/GNU/ct-ng-1.16.0 --without-automake
--without-libtool --without-libtoolize
?


No, It's in 'ct-ng menuconfig'. You should find it under the
"companion tools" menu.

But now I got the following error:

Already extracted 'linux-3.4.7'
[DEBUG] Already patched 'linux-3.4.7'
[DEBUG] Already extracted 'gmp-4.3.2'
[DEBUG] Already patched 'gmp-4.3.2'
[DEBUG] Already extracted 'mpfr-2.4.2'
[DEBUG] Already patched 'mpfr-2.4.2'
[DEBUG] Running autoreconf
[DEBUG] ==> Executing: 'autoreconf'
[ERROR] acinclude.m4:26: error: Autoconf version 2.60 or higher is required
[ALL ] acinclude.m4:26: the top level
[ALL ] autom4te: /usr/bin/m4 failed with exit status: 63
[ALL ] aclocal: autom4te failed with exit status: 63
[ALL ] autoreconf: aclocal failed with exit status: 63
[ERROR]

I ran "yum install autoconf" and it installs autoconf 2.59

What autoconf should I install and how ?

Thanks,
Zvika

On Sat, Oct 6, 2012 at 9:05 PM, Bryan Hundven <bryanhundven@gmail.com> wrote:
Zvi,

On Sat, Oct 6, 2012 at 12:02 PM, Zvi Vered <veredz72@gmail.com> wrote:
Dear Mr. Hundven,

My name is Bryan. ;)


How can I set ct-ng to use "companion tools bundled with ct-ng" ?

Read the documentation:

http://crosstool-ng.org/hg/crosstool-ng/raw-file/43ace4bb005e/docs/3%20-%20Configuring%20a%20toolchain.txt

The output of "libtool --version" is:
ltmain.sh (GNU libtool) 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)
I used "yum install" to install it.

This is weird. According to .configure --help, the minimum libtool
version should be:
 1.5.26
But running .configure does not alert on a libtool problem.
Can this cause the problem ?

I tried pastebin but I should be a PRO user to paste all build.log

You help is highly appreciated.

Thanks,
Zvika

On Sat, Oct 6, 2012 at 10:10 AM, Bryan Hundven <bryanhundven@gmail.com> wrote:
On Fri, Oct 5, 2012 at 10:14 PM, Zvi Vered <veredz72@gmail.com> wrote:
Hello,

I'm using crosstool-ng 1.16.0 to create a toolchain for
"i686-nptl-linux-gnu" under centos 5.3

I got the following error:

[ALL ] ./libtool: line 466: CDPATH: command not found
[ALL ] ./libtool: line 466: CDPATH: command not found
[ALL ] ./libtool: line 1144: func_opt_split: command not found
[ALL ] libtool: Version mismatch error. This is libtool 2.2.6
Debian-2.2.6a-1ubuntu1, but the
[ALL ] libtool: definition of this LT_INIT comes from an older release.
[ALL ] libtool: You should recreate aclocal.m4 with macros from
libtool 2.2.6 Debian-2.2.6a-1ubuntu1
[ALL ] libtool: and run autoconf again.
[ERROR] make[1]: *** [loop.lo] Error 1
[ALL ] make[1]: *** Waiting for unfinished jobs....
[ALL ] ./libtool: line 466: CDPATH: command not found
[ALL ] ./libtool: line 1144: func_opt_split: command not found
[ALL ] libtool: Version mismatch error. This is libtool 2.2.6
Debian-2.2.6a-1ubuntu1, but the
[ALL ] libtool: definition of this LT_INIT comes from an older release.
[ALL ] libtool: You should recreate aclocal.m4 with macros from
libtool 2.2.6 Debian-2.2.6a-1ubuntu1
[ALL ] libtool: and run autoconf again.
[ERROR] make[1]: *** [block.lo] Error 1
[ALL ] ./libtool: line 1144: func_opt_split: command not found
[ALL ] libtool: Version mismatch error. This is libtool 2.2.6
Debian-2.2.6a-1ubuntu1, but the
[ALL ] libtool: definition of this LT_INIT comes from an older release.
[ALL ] libtool: You should recreate aclocal.m4 with macros from
libtool 2.2.6 Debian-2.2.6a-1ubuntu1
[ALL ] libtool: and run autoconf again.
[ERROR] make[1]: *** [names.lo] Error 1
[ALL ] make[1]: Leaving directory
`/home/zvivered/GNU/ct-ng-1.16.0/working/i686-nptl-linux-gnu/build/build-cloog-ppl-host-i686-build_pc-linux-gnu'
[ERROR]
[ERROR] >>
[ERROR] >> Build failed in step 'Installing CLooG/PPL for host'
[ERROR] >> called in step '(top-level)'
[ERROR] >>
[ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@158]
[ERROR] >> called from:
do_cloog_backend[scripts/build/companion_libs/cloog.sh@111]
[ERROR] >> called from:
do_cloog_for_host[scripts/build/companion_libs/cloog.sh@72]
[ERROR] >> called from: main[scripts/crosstool-NG.sh@598]
[ERROR] >>
[ERROR] >> For more info on this error, look at the file: 'build.log'
[ERROR] >> There is a list of known issues, some with workarounds, in:
[ERROR] >>
'/home/zvivered/GNU/ct-ng-1.16.0/share/doc/crosstool-ng/ct-ng.1.16.0/B
- Known issues.txt'
[ERROR]
[ERROR] (elapsed: 6:05.48)

Attached config.ng (copy of .config).

Can you help find the problem ?

Thanks,
Zvika

--
For unsubscribe information see http://sourceware.org/lists.html#faq

Zvi,

Having the full log - posted to pastebin, or similar site, or hosted
on some other web site to save space on the mailing list - would also
be very helpful in this situation.

From what I read, it looks like you have two different versions of
libtool in the same path!?! weird!

Have you tried cloog 0.15.11?

As I said in my previous message about automake, try using the
companion tools bundled with ct-ng.
( http://sourceware.org/ml/crossgcc/2012-10/msg00014.html )

# CT_COMP_TOOLS is not set

Not all systems are compatible with ct-ng, which is why we provide m4,
autoconf, automake, libtool, and make.

Also, this only seems to be a problem with cloog-ppl, have you also
tried google searching around for similar cloog build errors? This
doesn't look like it would be specific to crosstool-ng, but having the
full build log might prove that otherwise.

-Bryan

-Bryan

-Bryan 


--
For unsubscribe information see http://sourceware.org/lists.html#faq

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]