Re: GGI code

["Suhaib M. Siddiqi" <Ssiddiqi@InspirePharm.Com>]

For the Cygwin-xfree developers, I have uploaded to
ftp://sourceware.cygnus.com/pub/cygwin/xfree, the GGI code, which is known
to compile with Cygwin B20.1.

Suhaib

----- Original Message -----
From: John Fortin <fortinj@ibm.net>
To: Suhaib M. Siddiqi <ssiddiqi@inspirepharm.com>
Cc: Marcus Sundberg <mackan@stacken.kth.se>
Sent: Sunday, June 13, 1999 9:54 PM
Subject: Re: Socket


> When I run configure in the libgii directory, I find that config.h does
> not have anything in it.  This gets created from confdefs.h ( sed script
> ).  The configure script has commands to create confdefs.h ( and create
> the #defines which are missing ) but does not seem to be executed (
> guess here ).  I can't regenerate the configure file, as I have autoconf
> 2.12 not 2.13 ( sigh ).
>
> Hope this helps.
>
> John
>
> "Suhaib M. Siddiqi" wrote:
> >
> > I guess Marcus add something again.  I remember these undefined
references were fixed.  I am CC'ing these to Marcus to so he knows
> > that Cygwin support is broken again in June 13 snapshot.
> >
> > Marcus, can you have a look at it?  John is trying to solve the XGGI
server problems
> >
> > Suhaib
> >
> > ----- Original Message -----
> > From: John Fortin <fortinj@ibm.net>
> > To: Suhaib M. Siddiqi <ssiddiqi@inspirepharm.com>
> > Sent: Sunday, June 13, 1999 9:08 PM
> > Subject: Re: Socket
> >
> > > Suhaib,
> > > When I compile libgii, I get an error in libgii/gg/misc.c indicating
> > > that ggUSleep must be defined for this system.  There are #defines at
> > > the end of the file.  For now, I have this commented out.  Should it
be?
> > >
> > > Also, when compiling libgii/gii/init.c I get undefined references to
> > > GIICONFDIR and GIITAGLEN.
> > > I can' find these anywhere.
> > >
> > > John
> > >
> > >
> > >
> > > "Suhaib M. Siddiqi" wrote:
> > > >
> > > > 212 works just fine.  That note is for Linux users.
> > > >
> > > > Suhaib
> > > >
> > > > ----- Original Message -----
> > > > From: John Fortin <fortinj@ibm.net>
> > > > To: Suhaib M. Siddiqi <ssiddiqi@inspirepharm.com>
> > > > Sent: Sunday, June 13, 1999 6:32 PM
> > > > Subject: Re: Socket
> > > >
> > > > > Suhaib,
> > > > > OK, I got the ggi src.  However, it states I need autoconf 2.13 or
> > > > > higher.  I have 2.12 which is from the cygwin distribution.
> > > > >
> > > > >
> > > > >
> > > > > "Suhaib M. Siddiqi" wrote:
> > > > > >
> > > > > > John
> > > > > >
> > > > > > It is in xc-1.tar.bz2 or xc-2.tar.bz2.
> > > > > >
> > > > > > The most recent codes i will definitely post on Monday.  this
weekends I got busy with
> > > > > > several errands.
> > > > > >
> > > > > > You can get a stripped down very small archive from Marcus site.
So far I have not modified anything in XGGI.
> > > > > >  http://www.stacken.kth.se/~mackan/ggi/xggi/
> > > > > >
> > > > > > It would also be nice if you could look at the GGI source
modification for Cygwin.
> > > > > >
> > > > > > Go to http://www.ggi-project.org
> > > > > > then from the bottom of the screen choose Obtaining CVS., then
*snapshots* at the fourth line of CVS page.  Get the
ggi-devel-990613.tar.gz.  Marcus per my suggestions added Cygwin support to
it. It compiles now without problems.
> > > > > > I suspect, He and I may have made a mistake in source code for
X-0-0-0.dll in
> > > > > > lib/ggi/display directory.
> > > > > >
> > > > > > Suhaib
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: John Fortin <fortinj@ibm.net>
> > > > > > To: <Ssiddiqi@InspirePharm.Com>
> > > > > > Sent: Sunday, June 13, 1999 4:09 PM
> > > > > > Subject: Re: Socket
> > > > > >
> > > > > > > Suhaib,
> > > > > > > Is it possible for you to post a tar-ball of the XGGI src ( or
is it
> > > > > > > somewhere in the distribution already ?)
> > > > > > >
> > > > > > > Thanks,
> > > > > > > John
> > > > > > >
> > > > > > > "Suhaib M. Siddiqi" wrote:
> > > > > > > >
> > > > > > > > On 13-Jun-99 Sergey Okhapkin wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >>I tried 127.0.0.1:0.0 to force the tcp connection.  Still
same problems.
> > > > > > > > >>I think I need to add some code to use Winsock32?
> > > > > > > > >
> > > > > > > > > NO!!!! You'll break cygwin compatibility of X server (xdm
support, for
> > > > > > > > > example).
> > > > > > > > >
> > > > > > > >
> > > > > > > > Sergey thanks.  I did not realize that I will break the
compability.
> > > > > > > > Do you have any other suggestions?
> > > > > > > > Suhaib
> > > > > > > >
> > > > > > > > > Sergey Okhapkin http://www.lexa.ru/sos
> > > > > > > > > Piscataway, NJ
> > > > > > > >
> > > > > > > > ----------------------------------
> > > > > > > > E-Mail: Suhaib M. Siddiqi <Ssiddiqi@InspirePharm.Com>
> > > > > > > > Date: 13-Jun-99
> > > > > > > > Time: 11:57:02
> > > > > > > >
> > > > > > > > This message was sent by XFMail
> > > > > > > > ----------------------------------
> > > > > > >
> > > > >
> > >
>