This is the mail archive of the cygwin-xfree@sourceware.cygnus.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: How to compile Xfree??



Dear Suhaib Siddiqi and Hi all

Using your advice it doen't apper rename error message. :-)  Thanks again.

Unfortunately I have some other error-messages.

cleaning in programs/Xserver...
make[3]: Entering directory `/Xsrc/xc/programs/Xserver'
rm -f XFree86.exe
rm -f Xprt.exe
rm -f Xnest.exe
rm -f Xvfb.exe -L../../lib/getsurf -lgetsurf
rm: invalid option -- L
Try `rm --help' for more information.
make[3]: *** [clean] Error 1
make[3]: Leaving directory `/Xsrc/xc/programs/Xserver'

I found Makefile under /Xsrc/xc/programs/Xserver

clean::
$(RM) Xvfb.exe -L$(TOP)/lib/getsurf -lgetsurf

How should I change it?

I think clean error is not so important.

cleaning in fonts/bdf/misc...
make[4]: Entering directory `/Xsrc/xc/fonts/bdf/misc'
rm -f fonts.dir
rm -f *.pcf *.pcf.Z *.pcf.gz
rm: clR7x12.pcf: is a directory
make[4]: *** [clean] Error 1
make[4]: Leaving directory `/Xsrc/xc/fonts/bdf/misc'


make[3]: Entering directory `/Xsrc/xc/lib/dpstk'
+ mkdir unshared
../../config/pswrap/pswrap -o XDPSpwraps.c -h XDPSpwraps.h XDPSpwraps.psw
../../config/pswrap/pswrap: not found
make[3]: *** [XDPSpwraps.c] Error 127



rm -f libX11.a
rm -f libX11.dll
if [ -f /tmp/DLL_BASE_COUNTER ]; then true; \
else echo 0x67000000 > /tmp/DLL_BASE_COUNTER; fi
dllwrap -s --def X11.def --output-lib libX11.a -o libX11.dll Context.o
Depths.o  ParseCmd.o  Quarks.o  AllCells.o  AllPlanes.o  AllowEv.o  AutoRep.o
Backgnd.o  BdrWidth.o  Bell.o  Border.o  ChAccCon.o  ChClMode.o  ChActPGb.o
ChCmap.o  ChGC.o  ChKeyCon.o  ChPntCon.o  ChProp.o  ChSaveSet.o  ChWAttrs.o
ChWindow.o  ChkIfEv.o  ChkMaskEv.o  ChkWinEv.o  ChkTypEv.o  ChkTypWEv.o
CirWin.o  CirWinDn.o  CirWinUp.o  ClDisplay.o  Clear.o  ClearArea.o  ConfWind.o
ConnDis.o  ConvSel.o  CopyArea.o  CopyCmap.o  CopyGC.o  CopyPlane.o  CrBFData.o
CrCmap.o  CrCursor.o  CrGC.o  CrGlCur.o  CrPFBData.o  CrPixmap.o  CrWindow.o
Cursor.o  DefCursor.o  DelProp.o  DestSubs.o  DestWind.o  DisName.o  DrArc.o
DrArcs.o  DrLine.o  DrLines.o  DrPoint.o  DrPoints.o  DrRect.o  DrRects.o
DrSegs.o  ErrDes.o  ErrHndlr.o  EvToWire.o  FetchName.o  FillArc.o  FillArcs.o
FillPoly.o  FillRct.o  FillRcts.o  Flush.o  Font.o  FontNames.o  FontInfo.o
FreeCmap.o  FreeCols.o  FreeCurs.o  FreeEData.o  FreeGC.o  FreePix.o  FSSaver.o
GCMisc.o  Geom.o  GetAtomNm.o  GetColor.o  GetDflt.o  GetFPath.o  GetFProp.o
GetGeom.o  GetHColor.o  GetHints.o  GetIFocus.o  GetImage.o  GetKCnt.o
GetMoEv.o  GetPCnt.o  GetPntMap.o  GetProp.o  GetSOwner.o  GetSSaver.o
GetStCmap.o  GetWAttrs.o  GrButton.o  GrKey.o  GrKeybd.o  GrPointer.o
GrServer.o  Host.o  IfEvent.o  ImUtil.o  ImText.o  ImText16.o  InitExt.o
InsCmap.o  IntAtom.o  KeyBind.o  KeysymStr.o  KillCl.o  LiHosts.o  LiICmaps.o
LiProps.o  ListExt.o  LoadFont.o  LookupCol.o  LowerWin.o Macros.o  MapRaised.o
MapSubs.o  MapWindow.o  MaskEvent.o  Misc.o  ModMap.o  MoveWin.o  NextEvent.o
OpenDis.o  ParseCol.o  ParseGeom.o  PeekEvent.o  PeekIfEv.o  Pending.o
PmapBgnd.o  PmapBord.o  PolyReg.o  PolyTxt.o  PolyTxt16.o  PutBEvent.o
PutImage.o  QuBest.o  QuColor.o  QuColors.o  QuCurShp.o  QuExt.o  QuKeybd.o
QuPntr.o  QuStipShp.o  QuTextE16.o  QuTextExt.o  QuTileShp.o  QuTree.o
RaiseWin.o  RdBitF.o  RecolorC.o  ReconfWin.o  Region.o  RepWindow.o
RestackWs.o  RotProp.o  ScrResStr.o  SelInput.o  SendEvent.o  SetBack
/usr/lib/gcc-lib/i686-pc-cygwin/2.95.2/../../../../i686-pc-cygwin/bin/ld: cannot
find -lipc
collect2: ld returned 1 exit status
dllwrap: gcc exited with status 1
make[4]: *** [libX11.dll] Error 1
make[4]: Target `all' not remade because of errors.


These are the other kinds of errors for the building.

I thank you in advance for your kind help

Regards

Lee




Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]