Fwd: RE: XDMCP Again

[Kirk Maskalenko <kirkm at fgm dot com>]

Running of Test45 to a Solaris 7 XDMCP machine. Windows task manager says 
XFree86 is not responding. See hp result below.

 > ./XWin -query piranha
ddxProcessArgument ()
_XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root
winDetectSupportedEngines () - Windows NT/2000
winDetectSupportedEngines () - DirectDraw installed
winDetectSupportedEngines () - Allowing PrimaryDD
winDetectSupportedEngines () - DirectDraw4 installed
winDetectSupportedEngines () - Returning, supported engines 0000001f
winSetEngine () - Using Shadow DirectDraw NonLocking
winAdjustVideoModeShadowDDNL () - Using Windows display depth of 16 bits 
per pix
el
winCreateBoundingWindowWindowed () - WindowClient w 1274 h 970 r 1274 l 0 b 970
t 0
winAllocateFBShadowDDNL () - lPitch: 2548
winInitVisualsShadowDDNL () - Masks 0000f800 000007e0 0000001f BPRGB 6 d 16
winLayerCreate () - dwDepth 16
winRandRInit ()
winCreateDefColormap () - Deferring to fbCreateDefColormap ()

Running against a HP/UX 10.20 machine.  XFree86 continues to run and Task 
Manager reports process running. Hub indicates lot of chatting going on 
between the PC and the HP box even when wait cursor is stationary.

 > ./XWin -query mermaid
ddxProcessArgument ()
_XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root
winDetectSupportedEngines () - Windows NT/2000
winDetectSupportedEngines () - DirectDraw installed
winDetectSupportedEngines () - Allowing PrimaryDD
winDetectSupportedEngines () - DirectDraw4 installed
winDetectSupportedEngines () - Returning, supported engines 0000001f
winSetEngine () - Using Shadow DirectDraw NonLocking
winAdjustVideoModeShadowDDNL () - Using Windows display depth of 16 bits 
per pix
el
winCreateBoundingWindowWindowed () - WindowClient w 1274 h 970 r 1274 l 0 b 970
t 0
winAllocateFBShadowDDNL () - lPitch: 2548
winInitVisualsShadowDDNL () - Masks 0000f800 000007e0 0000001f BPRGB 6 d 16
winLayerCreate () - dwDepth 16
winRandRInit ()
winCreateDefColormap () - Deferring to fbCreateDefColormap ()

>From: "Harold Hunt" <huntharo@msu.edu>
>To: "Kirk Maskalenko" <kirkm@fgm.com>
>Cc: "cygx" <cygwin-xfree@cygwin.com>
>Subject: RE: XDMCP Again
>Date: Thu, 30 Aug 2001 16:26:52 -0400
>X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0)
>Importance: Normal
>
>Install Test45 and report your results to the list:
>http://xfree86.cygwin.com/devel/shadow/
>
>Harold
>
> > -----Original Message-----
> > From: cygwin-xfree-owner@sources.redhat.com
> > [mailto:cygwin-xfree-owner@sources.redhat.com]On Behalf Of Kirk
> > Maskalenko
> > Sent: Thursday, August 30, 2001 4:16 PM
> > To: cygwin-xfree@sourceware.cygnus.com
> > Subject: XDMCP Again
> >
> >
> > I cannot get Xfree86 XDMCP to work correctly between a Windows
> > 2000 box and
> > Solaris, HP/UX 11.0 or a Linux box.  In looking at the archives, lots of
> > others have had similar problems but I haven't seen any solutions to this
> > point.  Connecting to a Solaris 7 or 8 (dt) box hangs the server and the
> > cursor locks up. Connecting to a HP/UX 10 or 11 (dt) system hangs the
> > server after the wait cursor shows up and the cursor is alive.
> > Debian Linux
> > appears to need additional configuration to get working as no response
> > occurs. I have looked at the usual suspects such as the Xaccess file and
> > they are configured correctly. Commerical X servers running on other PCs
> > are working fine (except for the Debian (kdm) box). Anyone have success
> > using XDMCP with Solaris, Linux or Hp boxes? What command line
> > options are
> > you using to start the X server on the PC and what did you have to
> > configure on the Unix side?
> >
> > BTW, Running the Xsession manually works fine in all the configurations.
> >
> > Kirk
> >