This is the mail archive of the cygwin-xfree@cygwin.com mailing list for the Cygwin XFree86 project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: cygwin-xfree 4.2.0 installation problem


hmm just a thought, if you can config zonealarm to allow traffic on
port 6000 and/or 6001 it might be possible to get them working
together?  or?

check the zonealarm logs and see what zonealarm blocks and if you can
tell it to allow the X-traffic.

or does zonealarm do more to the network interface??

        /Andy

 
/ "Egon Phillips" <nigel_phillips@hotmail.com> wrote:
| >Why are you telling me this?
| Because you answered my earlier query.
| 
| >  I really don't care... you need to send all
| >Cygwin/XFree86 related mails to the Cygwin/XFree86 mailing list.
| >  I will reply to such mailings if I believe I can contribute.
| >
| >Having said that... ZoneAlarm is the problem and it must be removed (if I
| >remember correctly).  If you don't believe me then follow these steps:
| >
| >1) Admit that ZoneAlarm is the problem.
| >
| >2) Remove ZoneAlarm software from your system.
| >
| >3) In the event that step (1) fails, see step (1).
| >
| I guess you don't like zonealarm? ;-) Ok, Ok, I'll contact zonelabs
| and see if they have a work around.  If not I'll get rid of it.
| Pitty, we run TPF at the router, and zonealarm on our client computers.
| 
| THANX
| 
| >Harold
| >
| > > -----Original Message-----
| > > From: Egon Phillips [mailto:nigel_phillips@hotmail.com]
| > > Sent: Thursday, March 07, 2002 12:46 AM
| > > To: huntharo@msu.edu
| > > Subject: RE: cygwin-xfree 4.2.0 installation problem
| > >
| > >
| > > Thanx Harold,
| > >
| > > It is installed but won't run.  Apparently there is a problem
| > > with Zonalarm.
| > >   I was unable to find a solution in the archives.  That is
| > > without deleting
| > > zonealarm from my system.
| > >
| > > Which ports are used during the startup, shutdown and maintenance of
| > > cygwin-Xfree86?  Maybe if I open the associated ports xfree86
| > > will startup?
| > >
| > > Here is my output from the startx command:
| > >
| > > $ startx
| > >
| > > giving up.
| > > xinit:  Connection refused (errno 111):  unable to connect to X server
| > > xinit:  No such process (errno 3):  Server error.
| > >
| > >
| > > >From: "Harold Hunt" <huntharo@msu.edu>
| > > >To: <egon.phillips@sympatico.ca>
| > > >Subject: RE: cygwin-xfree 4.2.0 installation problem
| > > >Date: Wed, 6 Mar 2002 20:38:02 -0500
| > > >
| > > >You need to be following the Cygwin/XFree86 User's Guide
| > instructions for
| > > >installation... not the XFree86 general instructions.  The
| > Cygwin/XFree86
| > > >User's Guide is located at:
| > > >
| > > >http://xfree86.cygwin.com/docs/ug/
| > > >
| > > >Harold
| > > >

-- 
 The eye of the beholder rests on the beauty!


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]