This is the mail archive of the
cygwin@sourceware.cygnus.com
mailing list for the Cygwin project.
RE: B20: df bug (NT 4.0 SP4) reports max disk size of 2.0 GB only
- To: "Gnu-Win32 Mailing List (E-mail)" <gnu-win32 at cygnus dot com>
- Subject: RE: B20: df bug (NT 4.0 SP4) reports max disk size of 2.0 GB only
- From: "Austin David France" <adf at mentor-systems dot com>
- Date: Thu, 19 Nov 1998 11:47:20 -0000
> ---Krishna Sampath <ksampath@ekwireless.com> wrote:
> >
> >
> > the df command reports the same file size for all the disks on the
> > system.... i have 4 GHz disks but the program reports the following:
> >
> > Filesystem 1024-blocks Used Available Capacity Mounted on
> > \\.\tape1: 2096450 1862158 234292 89% /dev/st1
> > \\.\tape0: 2096450 1862158 234292 89% /dev/st0
> > \\.\b: 2096450 1862158 234292 89% /dev/fd1
> > \\.\a: 2096450 1862158 234292 89% /dev/fd0
> > C: 2096450 1862158 234292 89% /
> >
> > any ideas?
> >
>
> If you wish to see the other disks you must mount them.
>
> mount d:\\ /d
> mount e:\\ /e
> etc.
I believe this is an observation on the output of the df command under NT40
SP4 rather than a question why other drives do not appear.
My environment (NTW40 SP4) experiences the same problem, the \\.\<device>:
entries all report the same size information as the first mount point on my
system.
Filesystem 1024-blocks Used Available Capacity Mounted on
-> h: 8956204 4012060 4944144 45% /h
g: 662940 662940 0 100% /g
f: 2152512 922240 1230272 43% /f
e: 4192933 2576657 1616276 61% /e
-> \\.\tape1: 8956204 4012060 4944144 45% /dev/st1
-> \\.\tape0: 8956204 4012060 4944144 45% /dev/st0
-> \\.\b: 8956204 4012060 4944144 45% /dev/fd1
-> \\.\a: 8956204 4012060 4944144 45% /dev/fd0
d: 2499808 2194892 304916 88% /d
c: 2560288 2139574 420714 84% /c
e:\GnuWin32 4192933 2576657 1616276 61% /
Strange.
Austin David France
Mentor Systems plc
mailto:adf@mentor-systems.com
------------------------------------------------------------------------
The views and opinions expressed in this e-mail message are the sender's
and do not necessarily represent the views of Mentor Systems plc.
------------------------------------------------------------------------
-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".