This is the mail archive of the
cygwin@cygwin.com
mailing list for the Cygwin project.
RE: Problems with XML::Parser
- To: "'cygwin at cygwin dot com'" <cygwin at cygwin dot com>
- Subject: RE: Problems with XML::Parser
- From: Neil Lunn <neillunn at gunz dot com dot au>
- Date: Thu, 19 Jul 2001 18:44:53 +1000
Firstly you need to build expat.
http://prdownloads.sourceforge.net/expat/expat-1.95.0.tar.gz
Presently I have had no joy with 1.95.1 and don't have the time right now to
port properly. A few hacks are required but nothing too dificult.
Once this is installed you will need to create a symlink libexpat.dll to
libexpat-0-0-0.dll.
Then you may build XML-Parser-2.29 which is one release back. Same issue
with porting time.
If anyone else wants to post 'em patches, feel *free* to contribute.
--Neil
>-----Original Message-----
>From: RUMBLE,PHIL (A-Scotland,ex1) [mailto:phil_rumble@agilent.com]
>Sent: Thursday, July 19, 2001 5:52 PM
>To: 'cygwin@cygwin.com'
>Subject: Problems with XML::Parser
>
>
>People,
>
>I seem to unable to build XML::Parser. It builds ok, but the
>test section
>fails all tests.
>
>the tests can't seem to open the expat.dll, which does exist.
>
>Any Ideas
>
>Thanks in advance
>
>Rumble
>
>Here are the results
>
>make test
>
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/astress.t line 11.
>BEGIN failed--compilation aborted at t/astress.t line 11.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/cdata.t line 3.
>BEGIN failed--compilation aborted at t/cdata.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/decl.t line 3.
>BEGIN failed--compilation aborted at t/decl.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/defaulted.t line 3.
>BEGIN failed--compilation aborted at t/defaulted.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/encoding.t line 3.
>BEGIN failed--compilation aborted at t/encoding.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/external_ent.t line 3.
>BEGIN failed--compilation aborted at t/external_ent.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/file.t line 3.
>BEGIN failed--compilation aborted at t/file.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/finish.t line 3.
>BEGIN failed--compilation aborted at t/finish.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/namespaces.t line 3.
>BEGIN failed--compilation aborted at t/namespaces.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/parament.t line 3.
>BEGIN failed--compilation aborted at t/parament.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/partial.t line 3.
>BEGIN failed--compilation aborted at t/partial.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/skip.t line 3.
>BEGIN failed--compilation aborted at t/skip.t line 3.
>Can't load 'blib/arch/auto/XML/Parser/Expat/Expat.dll' for module
>XML::Parser::Expat: dlopen: Win32 error 126 at /usr/li
>b/perl5/5.6.1/cygwin/DynaLoader.pm line 206.
> at blib/lib/XML/Parser.pm line 15
>Compilation failed in require at blib/lib/XML/Parser.pm line 15.
>BEGIN failed--compilation aborted at blib/lib/XML/Parser.pm line 19.
>Compilation failed in require at t/stream.t line 3.
>BEGIN failed--compilation aborted at t/stream.t line 3.
>Failed 13/13 test scripts, 0.00% okay. 113/113 subtests
>failed, 0.00% okay.
>make: *** [test_dynamic] Error 2
>
>rumble@SQF4210 ~/.cpan/build/XML-Parser-2.30
>$ ls
>Changes MANIFEST Makefile.PL Parser README blib
>samples test.txt
>Expat Makefile Makefile.old Parser.pm XML.Parser.Expat.0
> pm_to_blib
>t
>
>rumble@SQF4210 ~/.cpan/build/XML-Parser-2.30
>$ ls -l
>total 161
>-rw-r--r-- 1 rumble None 24367 Oct 5 2000 Changes
>drwxr-xr-x 2 rumble None 12288 Jul 19 08:32 Expat
>-rw-r--r-- 1 rumble None 2434 Oct 3 2000 MANIFEST
>-rw-r--r-- 1 rumble None 23208 Jul 19 08:32 Makefile
>-rw-r--r-- 1 rumble None 2101 Oct 4 2000 Makefile.PL
>-rw-r--r-- 1 rumble None 23208 Jul 19 08:02 Makefile.old
>drwxr-xr-x 3 rumble None 0 Oct 5 2000 Parser
>-rw-r--r-- 1 rumble None 31377 Oct 4 2000 Parser.pm
>-rw-r--r-- 1 rumble None 2736 Oct 3 2000 README
>-rw-r--r-- 1 rumble None 28135 Jul 19 08:32
>XML.Parser.Expat.0
>drwxr-xr-x 4 rumble None 0 Jul 19 08:32 blib
>-rw-r--r-- 1 rumble None 0 Jul 19 08:32 pm_to_blib
>drwxr-xr-x 2 rumble None 4096 Oct 5 2000 samples
>drwxr-xr-x 2 rumble None 4096 Oct 5 2000 t
>-rw-r--r-- 1 rumble None 2927 Jul 19 08:34 test.txt
>
>rumble@SQF4210 ~/.cpan/build/XML-Parser-2.30
>$ less test.txt
>make[1]: Entering directory
>`/home/rumble/.cpan/build/XML-Parser-2.30/Expat'
>make[1]: Leaving directory
>`/home/rumble/.cpan/build/XML-Parser-2.30/Expat'
>PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib
>-I/usr/lib/perl5/5.6.1/cygwin -I/usr/lib/perl5/5.6.1 -e 'use Test
>::Harness qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t
>t/astress...........dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-25
> Failed 25/25 tests, 0.00% okay
>t/cdata.............dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-2
> Failed 2/2 tests, 0.00% okay
>t/decl..............dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-30
> Failed 30/30 tests, 0.00% okay
>t/defaulted.........dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-4
> Failed 4/4 tests, 0.00% okay
>t/encoding..........dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-4
> Failed 4/4 tests, 0.00% okay
>t/external_ent......dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-5
> Failed 5/5 tests, 0.00% okay
>t/file..............dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-2
> Failed 2/2 tests, 0.00% okay
>t/finish............dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-3
> Failed 3/3 tests, 0.00% okay
>t/namespaces........dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-16
> Failed 16/16 tests, 0.00% okay
>t/parament..........dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-12
> Failed 12/12 tests, 0.00% okay
>t/partial...........dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-3
> Failed 3/3 tests, 0.00% okay
>t/skip..............dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-4
> Failed 4/4 tests, 0.00% okay
>t/stream............dubious
> Test returned status 255 (wstat 65280, 0xff00)
>DIED. FAILED tests 1-3
> Failed 3/3 tests, 0.00% okay
>Failed Test Status Wstat Total Fail Failed List of Failed
>---------------------------------------------------------------
>-------------
>----
>t/astress.t 255 65280 25 25 100.00% 1-25
>t/cdata.t 255 65280 2 2 100.00% 1-2
>t/decl.t 255 65280 30 30 100.00% 1-30
>t/defaulted.t 255 65280 4 4 100.00% 1-4
>t/encoding.t 255 65280 4 4 100.00% 1-4
>t/external_ent.t 255 65280 5 5 100.00% 1-5
>t/file.t 255 65280 2 2 100.00% 1-2
>t/finish.t 255 65280 3 3 100.00% 1-3
>t/namespaces.t 255 65280 16 16 100.00% 1-16
>t/parament.t 255 65280 12 12 100.00% 1-12
>t/partial.t 255 65280 3 3 100.00% 1-3
>t/skip.t 255 65280 4 4 100.00% 1-4
>t/stream.t 255 65280 3 3 100.00% 1-3
>
>--
>Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
>Bug reporting: http://cygwin.com/bugs.html
>Documentation: http://cygwin.com/docs.html
>FAQ: http://cygwin.com/faq/
>
__________________________________________________________________________
Please Note :
Only the intended recipient is authorised to access or use this e-mail. If
you are not the intended recipient,
please delete this e-mail and notify the sender immediately. The contents
of this e-mail are the writer's
opinion and are not necessarily endorsed by the Gunz Companies unless
expressly stated.
We use virus scanning software but exclude all liability for viruses or
similar in any attachment.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/