Good news for Cygwin ? Re: [smartmontools-devel]Windows port

[Frédéric L. W. Meunier <lists1 at pervalidus dot net>]

I'm Cc'ing the Cygwin mailing-list since others may be
interested in a S.M.A.R.T. tool that works with it. And someone
may even be able to help you.

I got it to compile under Cygwin (without -mno-cygwin).

What I did:

mv os_generic.c os_generic.c.old
ln -sf os_win32/os_win32.c os_generic.c

Then configure and make as usual.

During configure I got:

checking for sigset... no

During make I got:

/d/Linux/smartmontools/sm5-Windows/os_generic.c:47: error: conflicting types for `strtoull'
/usr/include/stdlib.h:174: error: previous declaration of `strtoull'
/d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `strtoull':
/d/Linux/smartmontools/sm5-Windows/os_generic.c:49: warning: int format, different type arg (arg 3)
/d/Linux/smartmontools/sm5-Windows/os_generic.c:46: warning: unused parameter `base'
/d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `make_device_names':
/d/Linux/smartmontools/sm5-Windows/os_generic.c:99: warning: unused parameter `devlist'
/d/Linux/smartmontools/sm5-Windows/os_generic.c:99: warning: unused parameter `name'
/d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `ata_close':
/d/Linux/smartmontools/sm5-Windows/os_generic.c:495: warning: unused parameter `fd'
/d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `escalade_command_interface':
/d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `fd'
/d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `disknum'
/d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `command'
/d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `select'
/d/Linux/smartmontools/sm5-Windows/os_generic.c:613: warning: unused parameter `data'
/d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `aspi_io_call':
/d/Linux/smartmontools/sm5-Windows/os_generic.c:811: warning: long unsigned int format, HANDLE arg (arg 2)
/d/Linux/smartmontools/sm5-Windows/os_generic.c: In function `aspi_close':
/d/Linux/smartmontools/sm5-Windows/os_generic.c:849: warning: unused parameter `fd'

So, I commented the "Quick hack strtoull() for MSVC 6.0 using
sscanf" part and it compiled. I don't know if it's the right
thing to do.

I guess the unused warnings won't allow it to work on SCSI
drives ?

Anyway, at least smartctl -a /dev/hda worked on my ATA drive:

smartctl version 5.26 Copyright (C) 2002-3 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     MAXTOR 6L060J3
Serial Number:    663200252994
Firmware Version: A93.0500
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   5
ATA Standard is:  ATA/ATAPI-5 T13 1321D revision 1
Local Time is:    Mon Feb 23 18:18:41 2004 ESAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x05) Offline data collection activity was
                                        aborted by an interrupting command from host.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (  35) seconds.
Offline data collection
capabilities:                    (0x1b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  30) minutes.

SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0029   100   253   020    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   066   066   020    Pre-fail  Always       -       4287
  4 Start_Stop_Count        0x0032   100   100   008    Old_age   Always       -       54
  5 Reallocated_Sector_Ct   0x0033   100   100   020    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   093   023    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0012   076   076   001    Old_age   Always       -       16152
 10 Spin_Retry_Count        0x0026   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   020    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   008    Old_age   Always       -       39
 13 Read_Soft_Error_Rate    0x000b   100   100   023    Pre-fail  Always       -       0
194 Temperature_Celsius     0x0022   080   074   042    Old_age   Always       -       51
195 Hardware_ECC_Recovered  0x001a   100   003   000    Old_age   Always       -       6672101
196 Reallocated_Event_Count 0x0010   100   100   020    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0032   100   100   020    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x001a   198   198   000    Old_age   Always       -       2

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10323         -
# 2  Short offline       Completed without error       00%      9584         -
# 3  Short offline       Completed without error       00%      9582         -
# 4  Short offline       Completed without error       00%      4924         -

Please let me know of any other commands I should test. Only
what won't eat my data or the drive itself.

BTW, smartd also compiled, but reports everything in "Event
Viewer". Here's:

The description for Event ID ( 0 ) in Source ( smartd ) cannot
be found. The local computer may not have the necessary
registry information or message DLL files to display messages
from a remote computer. You may be able to use the /AUXSOURCE=
flag to retrieve this description; see Help and Support for
details. The following information is part of the event: smartd
: PID 3384 : smartd version 5.26 Copyright (C) 2002-3 Bruce
Allen.

Then it repeats all the above in each message, so I removed
them:

Home page is http://smartmontools.sourceforge.net/

PID 3384 : Opened configuration file /etc/smartd.conf.

Configuration file /etc/smartd.conf parsed..

Device: /dev/hda, opened.

Device: /dev/hda, not found in smartd database..

Device: /dev/hda, is SMART capable. Adding to "monitor" list..

Monitoring 1 ATA and 0 SCSI devices.

smartd has fork()ed into background mode. New PID=3428..

On Mon, 23 Feb 2004, Christian Franke wrote:

>
> >Any news ?
> >
> >
>
> Glad you asked. The Win32/MSVC6 sources are checked in on
> RELEASE_5_26_WIN32_BRANCH.
>
> Checkout: cvs co -r RELEASE_5_26_WIN32_BRANCH sm5
>
> Build: Open project "./os_win32/smartctl_vc6.dsp" in VC6 (or .NET),
> select "Release" configuration and press F7 to build
> ./os_win32/smartctl.exe.
>
> I will provide a plain Makefile later (The Makefile generation of VC6 is
> somewhat broken).
>
> If you use the web interface to browse the sources, please note that the
> new (branch-only) files (int64.h, posix/*, os_win32/*) appear in the
> "Attic" directories.
>
> Thanks for any comment.

-- 
How to contact me - http://www.pervalidus.net/contact.html

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/