This is the mail archive of the
docbook@lists.oasis-open.org
mailing list for the DocBook project.
Re: 400 setup and configs later...
- To: Fredrik Eriksson <fredrik dot eriksson at flowsystems dot se>
- Subject: Re: DOCBOOK: 400 setup and configs later...
- From: Jonathan Marks <jm at cmex dot org>
- Date: Thu, 06 Sep 2001 19:31:19 -0700
- Cc: "''docbook at lists dot oasis-open dot org' '" <docbook at lists dot oasis-open dot org>
- List-Id: <docbook.lists.oasis-open.org>
- Organization: CMEX.org
- References: <FC9698050AF75A48A444357DCDB701614F0AEC@electra.flowsystems.se>
Try this.
http://www.linuxdoc.org/authors/template/big-howto-template.sgml
and this
http://docbook.org/tdg/en/html/ch02.html#ch02-makesgml
Jonathan
Fredrik Eriksson wrote:
> Thanks Jonathan that got me a bit started but I still get a couple of
> hundred error messages each time I try to do anything. Do you have any real
> simple testfile to just test out the system you can point me to?
>
> Cheers,
>
> Fredrik
>
> -----Original Message-----
> From: Jonathan Marks
> To: Fredrik Eriksson
> Cc: 'docbook@lists.oasis-open.org'
> Sent: 2001-09-06 10:24
> Subject: Re: DOCBOOK: 400 setup and configs later...
>
> Yep, I'm also perservering through this. I may be a bit ahead, I do not
>
> quite understand everything yet, but I do have a configuration that
> works. It is documented below. Other than describing how to install
> tetex and openjade as RPM's, it should be rather generic.
>
> Good luck.
>
> <<docbook-config.txt>>
>
>
----------------------------------------------------------------
To subscribe or unsubscribe from this elist use the subscription
manager: <http://lists.oasis-open.org/ob/adm.pl>