STM32F107 on STM3210C-EVAL

["Gian Maria" <g_giacomello at yahoo dot it>]

I'm porting eCos to STM3210C and I find a logical error on the
implementation of CYGPKG_HAL_CORTEXM_STM32.
CYGPKG_HAL_CORTEXM_STM32 must be the base of all STM32 uP and so is not
correct for me to use

    cdl_option CYGHWR_HAL_CORTEXM_STM32 {
        display          "STM32 variant in use"
        flavor           data
        default_value    {"F103ZE"}
        legal_values     {"F103RC" "F103VC" "F103ZC"
                          "F103RD" "F103VD" "F103ZD"
                          "F103RE" "F103VE" "F103ZE" }
        description      "The STM32 has several variants, the main
differences
                          being in the size of on-chip FLASH and SRAM
                          and numbers of some peripherals. This option
                          allows the platform HAL to select the specific
                          microcontroller fitted."
    }

That is inside "ecoscvs\ecos\packages\hal\cortexm\stm32\var\current\cdl",
because with my EVB for example 
the uP is a STM32F107VC. With this I can't set the right uP as default for
the template.
I'm right? I think the correct is to put the code inside
"ecoscvs\ecos\packages\hal\cortexm\stm32\stm3210e_eval\current\cdl"

Can someone modify this so I can update my CVS and work with the right code?

Best regards Gisn.

PS: 
1 - When I finish my piece of port, that is at the beginning and I'm
learning eCos who can upload?
2 - For every suggest Is this the right place?
3 - I have to post the full port or can post pieces of code as they are
ready?