Re: eCos GNU tools 4.6.2-20120125 ready for testing

[John Dallaway <john at dallaway dot org dot uk>]

Hi Alex

Alex Schuilenburg wrote:

> The RedBoot issue on the STM3210E-EVAL turned out to be a non-issue. 
> eCos and eCosPro RedBoot are compatible. There was an eCosPro specific
> issue which I had forgotten about - sorry.  The board ran overnight just
> over 1000 tests in different eCos configurations.  There are currently 9
> failures, listed according to their configuration name in our test farm.
> As jld knows, when a test fails in the farm it is automatically rerun an
> additional 2 times to confirm the failure is reproducible.  All other
> tests in these configurations passed.

Thank you for the info. I assume this was using your own build of GDB.
Could you switch to arm-eabi-gdb 7.3.1 from the test release for any
future perms please? With Cortex-M target such as STM3210E-EVAL you will
need to specify the attached target description file before connecting
to the target:

  (gdb) set tdesc filename gdb-tdesc-cortexm-fpa.xml

I can confirm that this is working for me.

Thanks, again...

John Dallaway
eCos maintainer
http://www.dallaway.org.uk/john

Attachment: gdb-tdesc-cortexm-fpa-120307.tar.bz2
Description: application/bzip