This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
eth0 onarm EDB7111-2
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] eth0 onarm EDB7111-2
- From: Rene dot Affourtit at pemstar dot nl
- Date: Tue, 30 May 2000 16:39:30 +0200
Hi,
I have a problem trying to initialize the eth0 interface on the EDB7111-2
board. (aka CL-PS7111)
when the device is initialized it keeps waiting for the InitD bit to go
high.
(the revision number looks strange to me also, is it OK ?)
Do I need to modify hardware as on EDB7209 ?
any pointers will be welcome
output on hal_diag:
RAM EDB7XXX eCos
Init device '/dev/ttydiag'
Init tty channel: 805495C
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser1'
EDB7XXX SERIAL init - dev: 800004C0.13
Set output buffer - buf: 8057FDC len: 128
Set input buffer - buf: 805805C len: 128
Set CTL: 8°Network stack using 65536 bytes for misc space
65536 bytes for mbufs
131072 bytes for mbuf clusters
Init device 'edb7xxx'
cs8900 init
CS8900 - type: 630E, rev: 630E