This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Re: problem when building ecos
- To: <ecos-discuss at sourceware dot cygnus dot com>
- Subject: Re: [ECOS] problem when building ecos
- From: "Sylvain Daubert" <sdaubert at elios-informatique dot fr>
- Date: Thu, 15 Jun 2000 10:39:03 +0200
- References: <001d01bfd6a4$9b93d280$0a07a8c0@eliosinformatique.fr>
I'm sorry but Outlook placed "file:" in front of all path
Sylvain
> Hi,
>
> When I open ecos configuration tools and try to build library, I meet the
> following error :
>
>
> make -r -C hal/powerpc/arch/v1_3_1
> file://H/ECOS-1.3.1/fads_install/include/cyg/hal/ppc_offsets.inc
> make[1]: Entering directory
> `/cygdrive/h/ECOS-1.3.1/fads_build/hal/powerpc/arch/v1_3_1'
>
>
powerpc-eabi-gcc -msoft-float -mcpu=860 -Wall -Wpointer-arith -Wstrict-proto
>
types -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdat
>
-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority -I//H/ECOS
> -1.3.1/fads_install/include -I//D/Cygnus-99r1p1/RedHat-eCos/packages/hal/p
ow
>
erpc/arch/v1_3_1 -I//D/Cygnus-99r1p1/RedHat-eCos/packages/hal/powerpc/arch/v
>
1_3_1/src -I//D/Cygnus-99r1p1/RedHat-eCos/packages/hal/powerpc/arch/v1_3_1/t
> ests -I. -Wp,-MD,ppc_offsets.tmp -o hal_mk_defs.tmp -S
>
file://D/Cygnus-99r1p1/RedHat-eCos/packages/hal/powerpc/arch/v1_3_1/src/hal_
mk_de
> fs.c
>
>
file://D/Cygnus-99r1p1/RedHat-eCos/packages/hal/powerpc/arch/v1_3_1/src/hal_
mk_de
> fs.c:46: pkgconf/hal.h: No such file or directory
>
>
file://D/Cygnus-99r1p1/RedHat-eCos/packages/hal/powerpc/arch/v1_3_1/src/hal_
mk_de
> fs.c:48: cyg/hal/hal_arch.h: No such file or directory
>
>
file://D/Cygnus-99r1p1/RedHat-eCos/packages/hal/powerpc/arch/v1_3_1/src/hal_
mk_de
> fs.c:49: cyg/hal/hal_intr.h: No such file or directory
>
> make[1]: *** [//H/ECOS-1.3.1/fads_install/include/cyg/hal/ppc_offsets.inc]
> Error 1
> make[1]: Leaving directory
> `/cygdrive/h/ECOS-1.3.1/fads_build/hal/powerpc/arch/v1_3_1'
> make: *** [build] Error 2
>
>
> ecos is installed on D drive and my configuration is saved on H drive.
>
> thanks
>
> Sylvain