This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
RE: Threading on EDB7211
- To: Alfredo Knecht <aknecht at cimsi dot cim dot ch>
- Subject: RE: [ECOS] Threading on EDB7211
- From: Gary Thomas <gthomas at redhat dot com>
- Date: Mon, 19 Jun 2000 14:22:31 -0600 (MDT)
- Cc: ecos-discuss at sourceware dot cygnus dot com
I built a EDB7211 install/build tree & put the whole thing at:
ftp://ftp.chez-thomas.org/pub/eCos/edb7211/
Pick and choose. Let me know what happens.
Also, if you had a chance, perhaps you could try an older binutils snapshot.
The one that I know works is from 000321 (I also put this file under /eCos)
Note: ftp.chez-thomas.org is a new address. If this doesn't work, try
hermes.chez-thomas.org.
On 19-Jun-00 Alfredo Knecht wrote:
> Hi All,
> I sure am glad for Rene, though I think he was asking for trouble...
> As for my problems, they are still here even after installing binutils
> 2.10rc3.
> Innocent as a lamb, still investigating on this strange behaviour. :)
> I will let you know as soon as I find something;
> In the meantime, would anybody bother to send me known working objects
> under the /install/lib/ for an EDB-7111-2, no matter which configuration?
> just to narrow the quest a little.
> Thank you,
> Alfredo
>
> At 06:06 19.6.00 -0600, you wrote:
>>
>>On 19-Jun-00 Rene.Affourtit@pemstar.nl wrote:
>>>
>>> Thanks for the hint,
>>>
>>> but as it turned out my problem was caused by a modification I made in
>>> vectors.s which caused that no interupts were handled by ecos at all.
>>> It's strange how two very different problems can have the same symptoms.
>>> Sorry to have bothered you all with something that was entirely my own
>>> fault.
>>>
>>
>>No need to apologize (just don't do it again :-)
>>
>>This mailing list is supposed to be a forum where ideas and questions can
>>be posted and hopefully resolved. Even if the problem was your fault,
>>asking it here let's everyone who uses eCos about it. When a solution
>>is found, we all hear about it as well and can benefit from the experience.
>>
>>Just for grins - what did you change in vectors.S, why did you do it and
>>what did you do wrong? [Just for pedagogic enlightment :-) ]
>>
>>
> ************************************************************************
> Alfredo Knecht Fax ++41 91 610 8970 Tel ++41 91 610 8960
> SUPSI-ICIMSI aknecht@cimsi.cim.ch http://www.cimsi.cim.ch
>
> Istituto CIM della Svizzera italiana CH-6928 Manno (Lugano)
> ************************************************************************
>