This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: How to connect GDB with Redboot
- To: jskov at redhat dot com
- Subject: Re: [ECOS] How to connect GDB with Redboot
- From: ness <root at zh dot t2-design dot com>
- Date: Wed, 1 Nov 2000 15:50:25 +0800 (CST)
- cc: ecos-discuss at sourceware dot cygnus dot com
> ness> Hi Jifl and Jesper. First ,thank you for your advice. I use
> ness> the PMON to debug the redboot.srec. Now the program can go to
> ness> cyg_start, and executes the loop successfully. And the net is
> ness> working right. But I can't input redboot's command. And we just
> ness> need ethernet debug, so I just need the module which can connect
> ness> with GDB, and no input is not problem. Is it right?
>
> ness> But when the program executes the "breakpoint()" ,it stops. Do I
> ness> need to do something for the virtual vector table or other?
>
> If you don't see a prompt, there's a problem with the HAL serial
> driver. Or maybe your PMON interaction is spoiling things.
>
> Jesper
I just want let GDB connect with target, and GDB can load program via
ethernet. Does redboot provide connection with GDB and let GDB can load
program via ethernet?
If it does ,how do I change the redboot.
Many thanks.
ness