This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: build brutus redboot error
- To: "Jun Wu" <junw at huawei dot com>
- Subject: Re: [ECOS] build brutus redboot error
- From: "Dave Airlie" <airlied at parthus dot com>
- Date: 29 Nov 2000 10:50:40 +0000
- Cc: ecos-discuss at sourceware dot cygnus dot com
Hi,
I've seen this myself
if your tools are in c:\tools
do
mount //c/tools /tools
I think this solved it for me..
Dave.
On Wed, 29 Nov 2000, Jun Wu wrote:
> Hi ecos experts,
> I use configuration tool(winnt/1.3.1.2) to set following configurations
> Hardware: Intel StrongARM SA1100 board
> Packages: redboot
> (ecos cvs repository from ftp://ftp.skynet.ie/cvs/ecos-001129.tar.gz)
>
> Then I build the target, but error occurs,
> ...
> arm-elf-gcc -mcpu=strongarm1100 -Wall -Wpointer-arith -Wstrict-prototypes -W
> inline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sectio
> ns -fno-rtti -fno-exceptions -fvtable-gc -finit-priority -I//C/ecosconfig/b
> rutus_install/include -I//C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/cur
> rent -I//C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/src -I//C/PR
> OGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/tests -I. -Wp,-MD,arm.tmp
> -o hal_mk_defs.tmp -S
> file://C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/src/hal_mk_def
> s.c
> cpp: too many input files
> make[1]: *** [arm.inc] Error 1
> make[1]: Leaving directory `/ecosconfig/brutus_build/hal/arm/arch/current'
> make: *** [build] Error 2
>
> How can I resolve this problem?
>
> Many thanks
>
> Jun Wu
>
>
>
--
David Airlie, Software Engineer, Parthus Technologies plc.,
Mary Rosse Centre, National Tech Park, Limerick, Ireland.
t: +353-61-508116 / f: +353-61-508101 / David.Airlie@parthus.com