This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: How to run eCos in SMDK41100 board
- To: james chen <james_ch1 at sina dot com>
- Subject: Re: [ECOS] How to run eCos in SMDK41100 board
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Wed, 31 Jan 2001 03:04:19 +0000
- Cc: ecos-discuss at sources dot redhat dot com
- Organization: Red Hat UK Ltd.
- References: <001a01c08b2f$56472200$c408aa0a@inc.inventec>
james chen wrote:
>
> Now I have a SMDK41100 board (Samsung
> MCU Development Kit) based on S3C44B0X (CPU is ARM7TDMI), I don't know how
> to let eCos run on it. the SMDK41100 board doesn't have eth net, can I run
> RedBoot through serial port and how to do it?
Yes RedBoot can be used over serial. To port a new board, generally the
advice is to copy an existing port that is closest to what you have. In
your case, the PID may be a good start. Then adapt it bit by bit for your
board.
See http://sources.redhat.com/ecos/docs-latest/porting/index.html for some
more detail.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine