This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: ROM startup on EBD7212
- To: Gary Thomas <gthomas at cambridge dot redhat dot com>
- Subject: RE: [ECOS] ROM startup on EBD7212
- From: "Lewin A.R.W. Edwards" <larwe at larwe dot com>
- Date: Fri, 02 Feb 2001 09:05:36 -0500
- Cc: ecos-discuss at sources dot redhat dot com
- References: <4.3.2.7.2.20010201175356.00ab8e10@larwe.com>
> > What else do I need to do to make a ROM-bootable application with eCos
> 1.3.1?
>
>This should work.
>
>How did you change the startup type? If you are using 'ecosconfig' (i.e.
>_not_
>using the Windows ConfigTool), then you'll need to rerun 'ecosconfig tree'.
No, I was using the Windows configuration tool. I also did a clean and
remake of the library [from within the config tool] before building my app.
(I also did a clean rebuild of the app).
>If you've done all this, does it turn on the "DIAG" LED? This is only turned
No it doesn't. No response at all.
=== Lewin A.R.W. Edwards (Embedded Engineer)
Work: http://www.digi-frame.com/
Personal: http://www.zws.com/ and http://www.larwe.com/
"Und setzet ihr nicht das Leben ein,
Nie wird euch das Leben gewonnen sein."