This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: ethernet support for XScale boards.


"Narayana, Venkat A." wrote:
> 
> Hi,
> In Redboot for Intel's Xscale board(not cyclone), can i use
> CYGPKG_DEVS_ETH_INTEL_I82559 instead of
> CYGPKG_DEVS_ETH_ARM_IQ80310 to have ethernet support in
> my board? or is there any other method, because i don't have onboard 82559
> ethernet chip.

Yes you could use that, assuming you'll have a PCI 82559 card. But you'll
have to still write some code to provide the information for your board on
your target. See the ocelot and nano targets' eth drivers, for example
devs/eth/arm/nano/current

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]