This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: ecos and ks32c50100
- To: Grant Edwards <grante at visi dot com>
- Subject: Re: [ECOS] ecos and ks32c50100
- From: Christoph Obermair <wegelagerer at yahoo dot com>
- Date: Thu, 2 Aug 2001 11:12:29 +0200 (CEST)
- Cc: ecos-discuss at sources dot redhat dot com
- Reply-To: christoph dot obermair at writeme dot com
--- Grant Edwards <grante@visi.com> schrieb:
> On Tue, Jul 31, 2001 at 10:00:54AM -0500, Grant Edwards wrote:
> >
> > I'll package up the Ethernet driver and the HAL and put them on
> > my ftp site today. I'll send a URL to the list once it's there.
>
> ftp://ftp.visi.com/users/grante/ecos
>
hi grant,
thank you very much for these sources. i think they'll help a lot. but i have expirienced some
problems building a kernel library:
first i tried build it using the cvs-package-repository. when saying "ecosconfig new snds" i got
the following reply:
C CYGPKG_HAL_ARM_SNDS, "requires" constraint not satisfied: CYGHWR_HAL_ARM_BIGENDIAN
C CYGHWR_HAL_ARM_CPU_FAMILY, Illegal current value unknown
Legal values are: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
(CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
(CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
(CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
""
using the 1.3.1-standard-repository went a little better. after succesfuls "ecosconfig new snds"
and "ecosconfig tree" i typed "make", where i finally got the following error:
...
make[1]: Leaving directory `/opt/ecos/ecos-1.3.1/ecos-work/hal/arm/arch/v1_3_1'
make -r -C hal/arm/snds/current build
make[1]: Entering directory `/opt/ecos/ecos-1.3.1/ecos-work/hal/arm/snds/current'
arm-elf-gcc -c -I/opt/ecos/ecos-1.3.1/ecos-work/install/include
-I/opt/ecos/ecos-1.3.1/packages/hal/arm/snds/current
-I/opt/ecos/ecos-1.3.1/packages/hal/arm/snds/current/src
-I/opt/ecos/ecos-1.3.1/packages/hal/arm/snds/current/tests -I.
-I/opt/ecos/ecos-1.3.1/packages/hal/arm/snds/current/src/ -mcpu=arm7tdmi -mbig-endian -Wall
-Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2
-ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority
-Wp,-MD,src/hal_diag.tmp -o src/hal_arm_snds_hal_diag.o
/opt/ecos/ecos-1.3.1/packages/hal/arm/snds/current/src/hal_diag.c
/opt/ecos/ecos-1.3.1/packages/hal/arm/snds/current/src/hal_diag.c:15: cyg/hal/hal_if.h: No such
file or directory
/opt/ecos/ecos-1.3.1/packages/hal/arm/snds/current/src/hal_diag.c:16: cyg/hal/hal_misc.h: No such
file or directory
make[1]: *** [src/hal_diag.o.d] Error 1
make[1]: Leaving directory `/opt/ecos/ecos-1.3.1/ecos-work/hal/arm/snds/current'
make: *** [build] Error 2
i've been working on this for while, but i couldn't make it out. can you help me please?
christoph
__________________________________________________________________
Do You Yahoo!?
Gesendet von Yahoo! Mail - http://mail.yahoo.de