[ECOS] RE: eCos + RedBoot Problems!

["Chris C." <hksbtx at 2bzd dot com>]

Jifl

>> 3. I found that there are only 3 templates [cygmon, stub, redboot] in the
>> config. tool can generate the image files in the bin directory. All of
the
>> other templates just have the include and lib in the untitled_install
>> directory.

>If you just use the default template, then if you choose build->tests from
>the graphical configuration tool, or type "make tests" if you are >using
the
>command line, then you will also get a "tests" subdirectory >underneath
>untitled_install.

In my case, I only have the redboot run on the target board. As I mention
above, I can't find other templates (e.g. kernel) can generate .bin/.elf in
the bin directory except redboot, cygmon and stub templates can generate
.bin/.elf files.
If I want to build the ecos (kernel) and the load it to the target board,
and run it via redboot command (go), how can I do?

----------------------------------------------------
Chris

Thanks! :D


_________________________________________________________________________
Sure, you can have free email. But free Email, Voicemail and Faxmail?
Check it out at http://www.2bzd.com