This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Installing RedBoot into AT91EB40 board (write into FLASH memory))
- To: Gozman Florian Leonard <leonard at bluegem dot codec dot ro>
- Subject: Re: [ECOS] Installing RedBoot into AT91EB40 board (write into FLASH memory))
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Fri, 03 Aug 2001 13:33:15 +0100
- CC: ecos-discuss at sources dot redhat dot com
- References: <3B6A4834.A9D4CAB4@bluegem.codec.ro>
Gozman Florian Leonard wrote:
>
> Hi!
>
> Thanks for previous reply.
>
> I have a problem when I try to write into FLASH. The messages which
> occur into minicom are:
>
> RedBoot>load -m y -b 0x02040000 // select redboot_ROMRAM.srec file and
> send it
> cs range: 0x02000000-0x0200c53c
> xyzModem - CRC mode, 1098(SOH)/0(STX)/0(CAN) packets, 11 retries
> RedBoot>fis write -f 0x01010000 -b 0x02040000 -l 0xe000
> * CAUTION * about to program FLASH at 0x01010000..0x0101dfff from
> 0x02040000 - // block !!! if I pressed CR => RedBoot>
Looks like your terminal emulator cut off the rest of the line - it was
probably asking for confirmation. Type "y" at the point it blocks.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine