This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
How to run a program with RedBoot (with "go" command )?
- To: ecos-discuss at sources dot redhat dot com
- Subject: [ECOS] How to run a program with RedBoot (with "go" command )?
- From: Gozman Florian Leonard <leonard at bluegem dot codec dot ro>
- Date: Mon, 06 Aug 2001 14:27:36 +0300
- Organization: bluegem
Hi,
My target is: AT91EB40. I ready installed RedBoot and I tried to run
some of examples.
When I tried to run the "hello world" program with "go" command into
RedBoot as follow:
RedBoot> load -m y -b 0x02040000 // select the file with ".srec" ext.
oint: 0x02020040, address range: 0x02020000-0x02026c4c
xyzModem - CRC mode, 653(SOH)/0(STX)/0(CAN) packets, 6 retries
RedBoot> go // blocks !!! none from the following commands works:
"go", "go 0x02040000" and "go 0x02020040"
What is the problem ?
Thanks !
Leonard