This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: ethernet download
- To: "'Grant Edwards'" <grante at visi dot com>,"'Gary Thomas'" <gthomas at redhat dot com>
- Subject: RE: [ECOS] ethernet download
- From: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Date: Fri, 24 Aug 2001 10:03:10 -0600
- Cc: "'Mark Salter'" <msalter at redhat dot com>,<ecos-discuss at sourceware dot cygnus dot com>
You're assuming I make bugs! ;)
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of Grant
Edwards
Sent: Friday, August 24, 2001 10:03 AM
To: Gary Thomas
Cc: Trenton D. Adams; Mark Salter; ecos-discuss@sourceware.cygnus.com
Subject: Re: [ECOS] ethernet download
On Fri, Aug 24, 2001 at 09:59:25AM -0600, Gary Thomas wrote:
>
> >> How about hardware with no serial port - only an ethernet
> >> connection? Yes, we have worked with such beasties... fun, in
> >> the purest sense :-)
> >
> > My version of RedBoot listens on a TCP port. You push the
> > reset button then you've got 10 seconds to telnet to RedBoot.
> > Once you've opened a telnet session, it just like you're
> > connected to a serial console.
>
> Actually, they all work that way :-) The real problem is when
> you're just bringing things up initially (or making major
> changes to the startup code). Trying to debug with only a
> network connection in this environment can be more than tricky.
That's when you use hardware-assisted debugging: either a
full-up in-circuit emulator or something like a JTAG interface.
Wasting several weeks of engineering time (and marketing
window) to save a few thousand dollars is false economy.
Or layout the board with a debugging serial port (something
with a nice big FIFO that will run at 115K baud or higher) and
then don't populate that portion of the board in production.
Or put a header of some sort on the board so that you can
attach a daughterboard with a UART. Something as simple as a
three pin SPI or I2C connector can be used to interface to a
UART while you're debugging.
--
Grant Edwards
grante@visi.com