This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
insight & remote serial targets running at 115200 baud
- To: "'ecos-discuss at sourceware dot cygnus dot com'" <ecos-discuss at sourceware dot cygnus dot com>
- Subject: [ECOS] insight & remote serial targets running at 115200 baud
- From: John Gumb <john at talisker dot demon dot co dot uk>
- Date: Thu, 30 Aug 2001 00:32:02 +0100
Folks,
The following adds the 115200 baud option to remote serial targets in insight. Simply add in 115200 to the list of baud rates in /src/gdb/insight-5.0/gdb/gdbtk/library/targetselection.itb for the "Remote/Serial" target.
To be on the safe side, I did the usual thing to get it installed:
bash-2.05$ cd /tmp/build/gdb
bash-2.05$ export MAKE_MODE=UNIX
bash-2.05$ make -w all install CC='gcc -mwin32'
Cheers,
John
--- targetselection.itb.old Thu Aug 30 00:15:45 2001
+++ targetselection.itb Thu Aug 30 00:18:07 2001
@@ -93,7 +93,7 @@
# Remote
set gdb_target(remote,pretty-name) "Remote/Serial"
set gdb_target(remote,defbaud) "9600"
- set gdb_target(remote,baud-rates) {9600 19200 38400 57600}
+ set gdb_target(remote,baud-rates) {9600 19200 38400 57600 115200}
set gdb_target(remote,cmd) "remote com1"
set gdb_target(remote,runlist) {1 1 0 1}
set gdb_target(remote,after_attaching) {}
bash-2.05$