This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: How i will get documentation
- To: Jonathan Larmour <jlarmour at redhat dot com>
- Subject: Re: [ECOS] How i will get documentation
- From: Gary Thomas <gthomas at redhat dot com>
- Date: 12 Sep 2001 12:55:18 +0900
- Cc: "sreenivas y.p.s.s" <sreenivas at multitech dot co dot in>,eCos Discussion <ecos-discuss at sources dot redhat dot com>
- References: <3B9E1448.601E2784@multitech.co.in> <3B9EB494.12504DA3@redhat.com>
On Wed, 2001-09-12 at 10:04, Jonathan Larmour wrote:
> "sreenivas y.p.s.s" wrote:
> >
> > Hi,
> > I am working on RedBoot on MPC860T controller.
> > Is there any code documentation on RedBoot Flashmanager 'fconfig'
> > implementation in RedBoot.
>
> *Code* documentation for RedBoot is, well, in the code.
>
> > problem:
> > when i press 'fconfig -l' in the minicom, shell promts with RedBoot>.
> > and it is not displaying options.
> > How will i debug the code.
>
> Have you done an fconfig first? If not, the fconfig area may not hav been
> set up.
>
You'll also see this behaviour if RedBoot could not identify your FLASH.
Do you have a message like this (when you boot)?
RAM: 0x00000000-0x01fc0000, 0x0001fba8-0x01f7f000 available
FLASH: 0x50000000 - 0x51000000, 64 blocks of 0x00040000 bytes each.
RedBoot>