Re: [ECOS] Redboot network setup

[Robin Farine <acnrf at dial dot eunet dot ch>]

Shouldn't the error case call eth_drv_msg_put(&eth_msg_free, msg)?

+               if(msg->len > len || msg->len < 14){
+                   diag_printf("ETHERNET PACKET ERROR: msg->len <0 or > len\n");
+                   eth_drv_msg_put(&eth_msg_free, msg);
+                   return 0;
+               }

Robin

Fabrice Gautier <Fabrice_Gautier@sdesigns.com> writes:

> > From: Jonathan Larmour [mailto:jlarmour@redhat.com]
> > Subject: Re: [ECOS] Redboot network setup
> > 
> > There shouldn't be anything needing a timeout on a 
> > non-blocking read. In the other ports you're looking at it's only the
> non-virtual 
> > vector blocking read functions that have these timeouts.
> 
> Right,
> 
> I think I found another problem which caused Redboot to hang. It seems that
> the size of the Ethernet packets are not checked before being used as
> arguments for memcopy in eth_drv_read. There is also a "len" argument in
> this function which is not used. I did this modification:
> 
> Index: eth_drv.c
> ===================================================================
> RCS file: /cvs/ecos/ecos/packages/io/eth/current/src/stand_alone/eth_drv.c,v
> retrieving revision 1.10
> diff -u -r1.10 eth_drv.c
> --- eth_drv.c   2001/08/17 16:37:36     1.10
> +++ eth_drv.c   2001/09/14 01:59:47
> @@ -341,6 +341,10 @@
>      msg = eth_drv_msg_get(&eth_msg_full);
>      if (msg) {
>          memcpy(eth_hdr, msg->data, 14);
> +               if(msg->len > len || msg->len < 14){
> +                       diag_printf("ETHERNET PACKET ERROR: msg->len <0 or >
> len\n");
> +                       return 0;
> +               }
>          memcpy(buf, &msg->data[14], msg->len-14);
>          eth_drv_msg_put(&eth_msg_free, msg);
>          res = msg->len;
> 
> 
> and it seems to works somewhat...