This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: hal/arm/sa11x0/ipaq/current/include/hal_platform_setup.h
On Wed, 2001-09-26 at 04:58, Jonathan Larmour wrote:
> Richard Panton wrote:
> >
> > I believe that the wrong register is used when initialising the MMU
> > Control Register in line 301 - r1 should be used (set up on line 295)
> > rather than r0.
>
> You believe or you know? :-). I take it you tried it and it's a happy
> bunny? If so I'll make the change.
>
On current ARM chips (certainly the SA1110), it doesn't matter. The
value loaded into 'r1' contains only "reserved MBO" bits.
For pedantic purposes, the line can be changed.