This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: e7t ROM startup
- To: "Robert Cragie" <rcc at jennic dot com>
- Subject: Re: [ECOS] e7t ROM startup
- From: Jesper Skov <jskov at redhat dot com>
- Date: 27 Sep 2001 08:59:45 +0200
- Cc: "Ravi Kumar B S" <ravikbs at mindtree dot com>,<ecos-discuss at sources dot redhat dot com>
- References: <NDBBLOIOMLKELOJBAPAGAEGDCJAA.rcc@jennic.com>
>>>>> "Robert" == Robert Cragie <rcc@jennic.com> writes:
Robert> I think you should be using 'flashload' (p 4-17 of Evaluator
Robert> E7T User Guide), not 'flashwrite'. As far as I can tell,
Robert> 'flashwrite' is a 'raw' write to the flash, i.e. copies RAM to
Robert> flash, without putting any module header on.
I don't see such a distinction between the two commands in the
manual. One writes RAM content to flash, the other downloads the
content via serial before writing it to flash.
Jesper